manualshive.com logo in svg

Garmin GNS 430AW, Pilot'S Manual & Reference

The Garmin GNS 430AW is a versatile avionics navigation system designed for pilots. Ensure optimal performance with the Pilot's manual & reference, available for free download on our website. Access this essential manual to enhance your flying experience. Visit manualshive.com to download your copy today.

Share
Download
background image

2 - NAV PAGES

44

Terrain Symbols

The symbols on the previous page are used to 

represent obstacles and potential impact points on the 
Terrain Page. Note that obstacle symbols are shown on 
display zoom ranges up to 10 

NM

: 

Color Interpretation

The Garmin TERRAIN system uses black, yellow, 

and red to depict terrain information relative to aircraft 
altitude. 

General Database Information

The Garmin TERRAIN system uses terrain and 

obstacle information supplied by government sources. 
The data undergoes verification by Garmin to confirm 
accuracy of the content, per TSO-C151b. 

However, the 

information displayed should never be understood to 
be all-inclusive. Pilots must familiarize themselves 
with the appropriate charts for safe flight. 

 

NOTE:  

The data contained in the terrain and 

obstacle databases comes from government 
agencies. Garmin accurately processes and cross-
validates the data, but cannot guarantee the 
accuracy and completeness of the data. 

The terrain/obstacle databases are contained on a 

datacard which is inserted in the right-most slot of the 
400W Series units. 

Database Versions

The version and area of coverage of each ter-

rain/obstacle database is shown on the Terrain Data-
base Versions Page, located in the AUX Page Group. 
Databases are checked for integrity at power-up. If a 
database is found to be missing and/or deficient, the 
TERRAIN system fails the self-test and issues a failure 
message. 

TERRAIN Database Information

Database Updates

Terrain/obstacle databases are updated periodi-

cally with the latest terrain and obstacle data. Visit the 
Garmin website to check for newer versions of terrain/
obstacle databases. Compare database cycle numbers 
to determine if a newer version is available. 

The database update process includes either 

reprogramming or replacing the database card and 
inserting the updated card in the right card slot on the 
unit front panel. The terrain/obstacle database may 
be downloaded via the intenet and the card repro-
grammed using a USB programmer available from 
Garmin. Contact Garmin at 800-800-1020 or at www.
garmin.com for more information. 

Terrain Operation

Summary of Contents for GNS 430AW























































































































































































































Reviews:

No comments

Related manuals for GNS 430AW

Navman 8084 Installation And Operation Manual preview
8084
Brand: Navman Pages: 116
Garmin DriveLuxe 50 Owner'S Manual preview
DriveLuxe 50
Brand: Garmin Pages: 26
Magellan eXplorist 400 - Wilderness Bundle Manual preview
eXplorist 400 - Wilderness Bundle
Brand: Magellan Pages: 108
ALK COPILOT LIVE 7 User Manual preview
COPILOT LIVE 7
Brand: ALK Pages: 56
Navigon 2000S Series User Manual preview
2000S Series
Brand: Navigon Pages: 126
Navico MX420 Operator'S Manual preview
MX420
Brand: Navico Pages: 236
WhereSafe MiniMax Quick Start Manual preview
MiniMax
Brand: WhereSafe Pages: 2
Garmin ECHOMAP UHD2 5 Series Owner'S Manual preview
ECHOMAP UHD2 5 Series
Brand: Garmin Pages: 76
Garmin GPS 16A Specifications preview
GPS 16A
Brand: Garmin Pages: 2
Thales DVOR 432 Technical Manual preview
DVOR 432
Brand: Thales Pages: 234
Carmanah A704-5 Owner'S Manual preview
A704-5
Brand: Carmanah Pages: 51
Raymarine E120W Operating Manual preview
E120W
Brand: Raymarine Pages: 24
Teltonika AT1000 User Manual preview
AT1000
Brand: Teltonika Pages: 31
GPS TrackMaker Reference Manual preview
TrackMaker
Brand: GPS Pages: 176
FINIS Hydro Tracker Instructions Manual preview
Hydro Tracker
Brand: FINIS Pages: 16
RoyalTek Sapphire RGM-2000 User Manual preview
Sapphire RGM-2000
Brand: RoyalTek Pages: 45
e2Link TPT02 Instructions For Use Manual preview
TPT02
Brand: e2Link Pages: 13
Micron Electronics Bolt Mini User Manual preview
Bolt Mini
Brand: Micron Electronics Pages: 10

Brands by name

Popular brands

Load more brands