Garmin GNS 430AW, Pilot'S Manual & Reference

Page: 102 / 214

5 - PROCEDURES
92
DME Arc Approach
14. As you cross the FAF, the destination sequences
to the MAP (“RW21”, the runway threshold).
With the needle centered, fly toward the MAP,
observing the altitude minimums dictated by
the approach plate. (When viewing the map
page, you’ll note that the final course segment
is displayed in magenta—the active leg of the
flight plan always appears in magenta—and
a dashed line extends the course beyond the
MAP. Do NOT follow this extended course.
Instead, follow published missed approach
procedures.)
DO NOT USE FOR
NAVIGATION
15. As you approach the MAP, a waypoint alert
(“ARRIVING WPT”) will appear in the lower right
corner. CDI scaling continues to tighten from
0.3 NM to 350 feet, full-scale deflection.
16. As you cross the MAP, “SUSP” will appear
above the OBS key, indicating that automatic
sequencing of approach waypoints will be sus-
pended at the MAP. A “from” indication will
be displayed on the CDI and default NAV page,
but course guidance along the final approach
course will continue. If a missed approach is
required, use the
OBS key to initiate the missed
approach sequence.