manualshive.com logo in svg

Garmin GNS 430AW, Pilot'S Manual & Reference

The Garmin GNS 430AW is a versatile avionics navigation system designed for pilots. Ensure optimal performance with the Pilot's manual & reference, available for free download on our website. Access this essential manual to enhance your flying experience. Visit manualshive.com to download your copy today.

Share
Download
background image

7 - NRST PAGES

141

Nearest Airspaces

Note that the airspace alerts are based on three-

dimensional data (latitude, longitude and altitude) to 
avoid nuisance alerts. The alert boundaries for con-
trolled airspace are also sectorized to provide complete 
information on any nearby airspace. Once one of the 
described conditions exists, the message annunciator 
will flash, alerting you of an airspace message. 

To view an airspace alert message: 

Airspace Name

Eighth Page 

in NRST group

Status and 

Time to Entry

1.   When  the  message  annunciator  above  the 

MSG

 key flashes, press 

MSG

. 

2.   Press 

MSG

  again  to  return  to  the  previous 

page. 

Once you have been provided an airspace alert 

message, detailed information concerning the specific 
airspace is provided on the 

nearest airspace page

. The 

nearest airspace page

 displays the airspace name, status 

(“Ahead”, “Ahead < 2nm”, etc. as described on the 
previous page), and a time to entry (if applicable). By 
selecting any airspace name listed on the 

nearest air-

space page

, additional details will be provided—includ-

ing controlling agency, communication frequencies 
and floor/ceiling limits. 

To view additional details for an airspace listed 
on the nearest airspace page: 

1.   Select the nearest airspace page. 

2.   Press  the 

small  right 

knob  to  activate  the 

cursor. 

3.   Turn the 

large right 

knob to scroll through 

the list, highlighting the desired airspace. 

4.   Press 

ENT

 to display the airspace page for the 

selected nearby airspace. 

5.   To return to the nearest airspace page, verify 

that “Done?”  is  highlighted  by  the  flashing 
cursor and press 

ENT

. 

Summary of Contents for GNS 430AW























































































































































































































Reviews:

No comments

Related manuals for GNS 430AW

Xirgo XT2500 Product Manual preview
XT2500
Brand: Xirgo Pages: 92
PassTime Plus SPTU-1 Quick Reference Manual preview
Plus SPTU-1
Brand: PassTime Pages: 15
IntelliTrac MyDreamCar Quick Installation Manual preview
MyDreamCar
Brand: IntelliTrac Pages: 8
Teletype WorldNav 5300 Hardware Manual preview
WorldNav 5300
Brand: Teletype Pages: 20
F-Tech BT2.5SR User Manual preview
BT2.5SR
Brand: F-Tech Pages: 10
S&T CAREU U1 Lite(WR) User Manual preview
CAREU U1 Lite(WR)
Brand: S&T Pages: 28
Navico MX420 Operator'S Manual preview
MX420
Brand: Navico Pages: 236
AvMap Geosat 6 Series User Manual preview
Geosat 6 Series
Brand: AvMap Pages: 120
UnaBiz UnaBell LTE-M User Manual preview
UnaBell LTE-M
Brand: UnaBiz Pages: 29
AIRIS T920A User Manual preview
T920A
Brand: AIRIS Pages: 45
Siera Wireless MP555 Software Installation Manual preview
MP555
Brand: Siera Wireless Pages: 74
I-Trac GTLT2 User Manual preview
GTLT2
Brand: I-Trac Pages: 21
Eagle AccuMap Sport Installation And Operation Instructions Manual preview
AccuMap Sport
Brand: Eagle Pages: 72
Maestro A2035-H User Manual preview
A2035-H
Brand: Maestro Pages: 34
Sageplan SageTracker Guardian User Manual preview
SageTracker Guardian
Brand: Sageplan Pages: 4
Queclink GL100S User Manuals preview
GL100S
Brand: Queclink Pages: 11
NaxerTech NTT-101 Manual preview
NTT-101
Brand: NaxerTech Pages: 19
Garmin SOCATA TBM850 Pilot'S Manual preview
SOCATA TBM850
Brand: Garmin Pages: 684

Brands by name

Popular brands

Load more brands