Garmin GNS 430AW, Pilot'S Manual & Reference

Page: 171 / 214

9 - AUX PAGES
161
Utility Page
Flight Timers
To view, use or reset the generic timer:
1. Select “Flight Timers” from the utility page.
2. The flashing cursor highlights “Start?”. To start
the generic timer, press
ENT
. (You will typically
begin with this step for count up timers. How-
ever, for count down timers, you may wish to
enter a count direction and time before starting
the timer. )
3. To change the count direction, turn the large
right
knob to highlight count direction field:
“Down” or “Up”. Turn the
small right
knob
to select the desired count direction. Press
ENT
when finished.
4. For a count down timer, turn the
large right
knob to highlight the time field. Use the
small
and
large right
knobs to enter the count
down time—in hours, minutes and seconds.
Press
ENT
when finished.
5. To stop the generic timer, turn the large right
knob to highlight “Stop?” and press ENT .
6. To reset the generic timer, turn the
large right
knob to highlight the time field. Press
CLR
,
followed by
ENT
.
To record or reset the departure time:
1. Select “Flight Timers” from the utility page.
2. Turn the
large right knob to highlight the
reset mode field, under “Departure Time”.
(The reset mode field will indicate “Pwr-on”
or “GS>30kt”.)
3. Turn the
small right
knob to select the desired
reset mode. (“Pwr-on” will record a departure
time when the 400W-series unit is turned on.
“GS>30kt” will record a departure time once
the GPS-computed ground speed exceeds 30
knots.)
4. Press
ENT
when finished.
5. To reset the departure time, turn the
large
right knob
to highlight “Reset?” and press
ENT
.
To view, use or reset total trip time:
1. Select “Flight Timers” from the utility page.
2. Turn the
large right
knob to highlight the
reset mode field, under “Total Trip Time”.
(The reset mode field will indicate “Pwr-on”
or “GS>30kt”.)
3. Turn the small right knob to select the desired
reset mode. (“Pwr-on” will record trip time, in
hours/minutes/seconds, any time the 400W-
series unit is turned on. “GS>30kt” will record
trip time any time the GPS-computed ground
speed exceeds 30 knots.)
4. Press
ENT
when finished.