190-01115-01
G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Page 34-74
Pitch Servo
1. Use the Autopilot Setup page to adjust the Pitch Servo gain setting
a) Engage the autopilot in ROL/PIT mode with the aircraft approximately level
i.
With no GMC 30X Controller:
1.Press, hold, and release the CWS/DISCONNECT button to engage the AP
ii. With a GMC 30X Controller:
1.Press the AP button on the GMC 30X to engage the AP
2.Press the YD button on the GMC 30X to DISENGAGE the YD
b) Press the MENU key two times on the GDU to enter the Main Menu page.
c) Press the Setup button.
d) Press the Autopilot button.