Garmin G1000 Series, Pilot'S Manual

Page: 96 / 338

190-00592-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40
3-20
NAV/COM
AUTO-TUNING UPON APPROACH
ACTIVATION (NAV FREQUENCIES)
NAV frequencies can be automatically loaded into the
NAV Frequency window upon approach activation, re-
gardless of the display unit being used.
NOTE: The primary NAV frequency becomes
auto-tuned upon loading of an approach .
To auto-tune a NAV frequency if the desired
approach is not already loaded:
1. Press the
PROC
key to open the Procedures
window.
2. Turn the
large FMS
knob to highlight the
‘SELECT APPROACH’ menu option and press
the
ENT key.
3. Use both the FMS knob and the ENT key as
needed to select the desired airport, VOR/ILS
approach and transition.
4. Turn the
large FMS
knob to highlight either the
‘LOAD?’ or ‘ACTIVATE?’ prompt and press the
ENT key. The primary NAV frequency for the
activated approach becomes loaded into the
standby field of the selected NAV radio.
Figure 3-33 Selecting an Approach
Figure 3-34 Loading an Approach