Garmin G1000 Series Pilot'S Manual Download Page 208

Page: 208 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00 Rev. A

7-74

MULTI FUNCTION DISPLAY

To select the NDB Information Page:

1. From any page, press and hold the

CLR

key to

select the Navigation Map Page. You may skip
this step if you are already viewing any of the
Map Group pages.

2. Turn the

large FMS

knob to select the ‘WPT’

page group. ‘WPT’ is displayed in the page
group icon located in the lower right corner
of the display.

3. Turn the

small FMS

knob to select the NDB

Information Page.

To select a NDB by using an Identiﬁer:

1. With the NDB Information Page displayed,

press the

FMS

knob to activate the cursor.

2. Turn the

small and large FMS

knobs to enter

a name for the identiﬁer and press the

ENT

key.

3. Press the

FMS

knob to remove the ﬂashing

cursor.

To select a NDB by using a Name:

1. With the NDB Information Page displayed,

press the

FMS

knob to activate the cursor.

2. Turn the

large FMS

knobs to highlight the name

ﬁeld

3. Turn the

large and

small FMS

knobs to enter

a name and press the

ENT

key.

4. Press the

FMS

knob to remove the ﬂashing

cursor.

To select a NDB by using the closest city:

1. With the NDB Information Page displayed,

press the

FMS

knob to activate the cursor.

2. Turn the

large FMS

knobs to highlight the clos-

est city ﬁeld

3. Turn the

large and

small FMS

knobs to enter

a city and press the

ENT

key.

4. Press the

FMS

knob to remove the ﬂashing

cursor.

NDB Information Page Options

The following NDB Information Page Options are

available by pressing the

MENU

key (with the NDB

Information Page displayed):

• ‘View Recent NDB List’ which allows you to view

the most recent NDB list.

To view the most recent NDB list:

1. Select the NDB Information Page and press

MENU

to display the NDB Information Page

Options. ‘View Recent NDB List’ is high-
lighted.

2. Press the

ENT

key. Turn the

small FMS

knob

to select an NDB from the list and press the

ENTER

key. The selected NDB is now the active

user NDB.

Figure 7-58 NDB Page Menu

Summary of Contents for G1000 Series



















































































































































































































































































































































Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands

Garmin G1000 Series, Pilot'S Manual

Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands