Garmin G1000 Series, Pilot'S Manual

Page: 142 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 7-8
MULTI FUNCTION DISPLAY
To select the Navigation Map Page:
1. Turn the large FMS knob to select the Map Page
group.
2. Turn the small FMS knob to select the Naviga-
tion Map Page. The page group name and page
title is displayed below the navigation status
bar; MAP – NAVIGATION MAP. In addition to
turning the
large and small FMS
knobs, the
Navigation Map Page can be selected from any
page by pressing and momentarily holding the
CLR (DFLT MAP) key.
NAVIGATION MAP PAGE OPERATIONS
The following Navigation Map Page operations can be
performed:
• Changing the Map Orientation
• Selecting a Map Range
• Using the Auto Zoom Feature
• Identifying Aviation Map Data
• Decluttering the Map
• Panning the Map
• Displaying Topographic Information on the Navi-
gation Map Page
• Displaying Terrain Information on the Navigation
Map Page
• Displaying Traffic on the Navigation Map Page
• MFD Navigation Status Window
• Navigation Map Page Options Menu
Changing the Map Orientation
See the map setup section of this document for instruc-
tions on how to change the map orientation.
Selecting a Map Range
The Navigation Map Page can be set to 23 different
range settings from 500 feet to 2000 nautical miles. The
current range is indicated in the lower right corner of the
Navigation Map Page and represents the
top-to-bottom
distance covered by the map . To change the map range
turn the joystick counter-clockwise to zoom in, turn it
clockwise to zoom out.
Using the Auto Zoom Feature
The autozoom feature automatically adjusts the map
from an enroute range of 2000 nm through each lower
range, stopping at a range of 1.5 nm as the aircraft
approaches the destination waypoint. See the Map
Setup section for instructions on enabling/disabling the
autozoom feature.
Map Range
Indicator
Figure 7-9 Map Range