Garmin G1000 Series, Pilot'S Manual, Page: 136 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 7-2
MULTI FUNCTION DISPLAY
MFD SOFTKEYS
The MFD softkeys are located below the display screen
and provide control over flight management functions
including GPS Navigation and flight planning. Figure 7-3
shows an MFD flowchart identifying what functions are
available via the softkey labels.
The MFD softkeys perform the following functions:
ENGINE
– Makes available the
LEAN
or
FUEL
and
SYSTEM softkeys which in turn access the Lean
Page and the System Page, respectively (see the
EIS section for more information)
Figure 7-2 MFD Softkeys
BACK RST FUEL SYSTEM ENGINE LEAN
ENGINE MAP DCLTR
BACK SYSTEM LEAN
ENGINE
ENGINE LEAN BACK SYSTEM
Press the
ENGINE
softkey
on any level to return to the
default Engine Page
TRAFFIC TOPO TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
CHKLIST
ASSIST CYL SLCT
EXIT EMERGCY ENGINE
DCLTR MAP ENGINE CHKLIST
CLR
DONE
The
DONE
softkey changes to
UNDO
when the checklist
item is already checked
BACK
Press to return to the
top softkey level
STRMSCP NEXRAD XM LTNG
(optional) (optional) (optional)
Press to return to the
top softkey level
Press to return to the
top softkey level
Press to return to the
top softkey level
DEC FUEL INC FUEL
DEC FUEL
ENGINE
SYSTEM FUEL
RST FUEL INC FUEL
DA 40 TDI (Diesel) Engine
softkey differences
MAP – Enables the following softkeys:
TRAFFIC – Displays/removes Mode S Traffic
on the Navigation Map
TOPO
– Displays/removes topographic infor-
mation on the Navigation Map
TERRAIN – Displays/removes terrain infor-
mation on the Navigation Map
BACK – Displays the ENGINE and MAP top
level softkeys
DCLTR (declutter) – Removes map information in
three levels
CHKLIST (checklist) – Displays the Checklist Page