Garmin G1000 Series Pilot'S Manual Download Page 59

Page: 59 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00 Rev. A

2-31

PRIMARY FLIGHT DISPLAY

To view information about an airport:

1. Press the

NRST

softkey to display a list of the

Nearest Airports.

2. Turn the

FMS

knob to select the desired airport

and press the

ENT

key. The airport information

is displayed with ‘BACK’ highlighted at the

bottom of the window.

3. When ﬁnished viewing the airport informa-

tion, press the

ENT

key to return to the nearest

airports list.

Figure 2-49 Airport Information Window

To select an airport from the Airport Infor-

mation Window by the airport identiﬁer,

location, and name ﬁelds:

1. From the Nearest Airport window, turn the

large FMS

knob to highlight the desired ﬁeld.

2. Turn the

FMS

knobs to select the desired loca-

tion, then press the

ENT

key.

3. Turn the

large FMS

knob to highlight ‘BACK’,

then press the

ENT

key.

To activate a Direct-to from the Nearest

Airports Window:

1. From the Nearest Airports Window, turn the

large FMS

knob to highlight the desired airport,

then press the

Direct-to

key. The Direct-to

Window appears.

2. Press the

ENT

key twice to activate.

To activate a Direct-to from the Airport

Information Window:

1. From the Airport Information Window, press

the

Direct-to

key.

2. Press the

ENT

key twice to activate.

To select a COM frequency:

From the Nearest Airports Window, turn the

large FMS

knob to highlight the desired fre-

quency, then press the

ENT

key. The frequency

is placed in the tuning box.

Summary of Contents for G1000 Series



















































































































































































































































































































































Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands

Garmin G1000 Series, Pilot'S Manual

Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands