Garmin G1000 Series Pilot'S Manual Download Page 63

Page: 63 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00 Rev. A

2-35

PRIMARY FLIGHT DISPLAY

To store a ﬂight plan:

1. From the Flight Plan Window, once all the

waypoints have been entered, press the

MENU

key to display the page menu options.

2. Turn the

FMS

knob to select ‘Store Flight Plan’,

then press the

ENT

key. The Store Flight Plan

Window is displayed with ‘OK’ highlighted.

3. Press the

ENT

key to store the ﬂight plan.

4. To cancel, turn the

large FMS

knob to highlight

‘CANCEL’ and press the

ENT

key.

Figure 2-54 Page Options Menu

Invert Flight Plan

Invert Flight Plan reverses the active ﬂight plan. After

traveling along a ﬂight plan, the pilot may wish to reverse
the route for navigation back to the original departure
point.

To activate an existing ﬂight plan in
reverse:

1. From the Flight Plan Window, press the

MENU

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Invert Flight

Plan’, then press the

ENT

key. The ﬂight plan

is now reversed and activated.

Figure 2-55 Invert Flight Plan Conﬁrmation Window

Delete Flight Plan

The entire ﬂight plan or selected waypoints within the

ﬂight plan may be deleted.

To delete the entire ﬂight plan:

1. From the Flight Plan Window, press the

MENU

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Delete Flight

Plan’, then press the

ENT

key. The ‘Delete All

Waypoints in Flight Plan’ message is displayed

with ‘OK’ highlighted.

3. Press the

ENT

key to delete all waypoints in the

ﬂight plan.

4. To cancel, turn the

large FMS

knob to highlight

‘CANCEL’ and press the

ENT

key.

To delete selected waypoints in the ﬂight

plan:

1. From the Flight Plan Window, turn the

large

FMS

knob to select the desired waypoint.

2. Press the

CLR

key. The ‘Remove Waypoint

Name’ window is displayed with ‘OK’ high-

lighted. Press the

ENT

key to delete the

selected waypoint.

3. To cancel, turn the

large FMS

knob to highlight

‘CANCEL’ and press the

ENT

key.

Figure 2--56 Delete Flight Plan Conﬁrmation Window

Summary of Contents for G1000 Series



















































































































































































































































































































































Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands

Garmin G1000 Series, Pilot'S Manual

Search results

Summary of Contents for G1000 Series

Reviews:

Related manuals for G1000 Series

Brands by name

Popular brands