Garmin G1000 Series, Pilot'S Manual

Page: 191 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 7-57
MULTI FUNCTION DISPLAY
7.7 PROCEDURES
ARRIVALS AND DEPARTURES
Based upon the active flight plan or Direct-to
destination, the Procedures Page provides direct access to
approaches, departures and arrivals. In either case, the
departure and destination airports must have associated
published procedures. The Procedures Page is displayed
by pressing the
PROC key.
Figure 7-44 Procedures Page
NOTE: Pilots should be familiar with section
1-1-20 of the Aeronautical Information Manual
(AIM) regarding the use of GPS.
To select a departure:
1. Press the PROC key to display the Procedures
Page. Turn the large FMS knob to highlight
‘Select Departure’ and press the
ENT
key.
2. The ‘Departure Loading’ page is displayed with
the list of departure options for the departure
airport. Turn either the
small or large FMS
knobs to enter the desired departure. Press
the
ENT
key.
3. ‘Load?’ is highlighted. Press the
ENT
key. The
departure becomes part of the flight plan.
To select an arrival:
1. Press the
PROC
key to display the Procedures
Page. Turn the large FMS knob to highlight
‘Select Arrival’ and press the ENT key.
2. The procedures page is displayed. Turn the
small and large FMS
knobs to enter the desired
arrival.
3. The cursor moves to the ‘TRANSITION’ field.
Turn the large FMS knob to highlight the
desired transition waypoint and press the ENT
key. The approach vectors option assumes you
will receive vectors to the final course segment
of the approach and will provide naviga-
tion guidance relative to the final approach
course.
NOTE : Vector departures are not part of the
aviation database.
NOTE: The approach vectors option assumes
the pilot will receive vectors to the final course
segment of the approach and will provide navi-
gation guidance on the final approach segment
and extension only.