manualshive.com logo in svg

Garmin G1000 Series, Pilot'S Manual

Introducing the WATANABE G1000 Series, a cutting-edge product designed to simplify your life. With its user-friendly features, this innovative device offers a streamlined experience like no other. Enhance your understanding with our free Simplified Instruction Manual available for download at manualshive.com now.

Share
Download
background image

Garmin G1000 Pilot’s Guide for the Diamond DA40

190-00592-00  Rev. A

8-16

OPTIONAL EQUIPMENT

To select the Weather Data Link Page:

1.  Turn the 

large FMS

 knob to select the Map Page 

Group.

2.  Turn the 

small FMS

 knob to select the Weather 

Data Link Page.

Weather Data Link Page Softkeys

The  following  softkeys  perform  the  GDL  69/69A 

weather functions on the Weather Data Link Page:

NEXRAD

 – Press to show NEXRAD weather and 

radar coverage information (both are activated at 
the same time).  Composite data from all of the 
NEXRAD radar sites in the United States is shown. 
This data is composed of the maximum reflectiv-
ity from the individual radar sweeps. The display 
of the information is color-coded to indicate the 
weather level severity.  The update rate is every 
five minutes. Refer to the legend for a description 
of the color code.

 

NOTE: 

WSR-88D  weather  surveillance  radar 

or NEXRAD (NEXt generation RADar) is a Dop-
pler  radar  system  that  has  greatly  improved 
the  detection  of  meteorological  events  such 
as  thunderstorms,  tornadoes,  and  hurricanes. 
An  extensive  network  of  NEXRAD  stations 
provides almost complete radar coverage of the 
continental  United  States, Alaska,  and  Hawaii. 
The unobstructed range of each NEXRAD is 124 
nautical miles.

NEXRAD Abnormalities

There  are  possible  abnormalities  regarding  displayed 

NEXRAD images.  Some, but not all, of those include:

•  Ground Clutter
•  Strobes and spurious radar data

•  Sun strobes, when the radar antenna points directly 

at the sun

•  Interference  from  buildings  or  mountains,  which 

may cause shadows

•  Military  aircraft  deploy  metallic  dust  which  can 

cause alterations in radar scans

NEXRAD Limitations

Certain limitations exist regarding the NEXRAD radar 

displays.  Some, but not all, are listed here for the user’s 
awareness:

•  NEXRAD base reflectivity does not provide sufficient 

information to determine cloud layers or precipita-
tion characteristics (hail vs. rain, etc).

•  NEXRAD base reflectivity is sampled at the minimum 

antenna elevation angle.  An individual NEXRAD site 
cannot depict high altitude storms at close ranges, 
and has no information about storms directly over 
the site. 

•  The resolution of displayed NEXRAD data is 2 kilo-

meters.  Therefore, when zoomed in on the  display, 
each square block is 2 kilometers.  The intensity 
level reflected by the square will be the highest level 
sampled within the 2 kilometer square area.  

NEXRAD Intensity

Colors  are  used  to  identify  the  different  NEXRAD 

echo  intensities  (reflectivity)  measured  in  dBZ  
(decibels  of  Z).    “Reflectivity”  is  the  amount  of 
transmitted  power  returned  to  the  radar  receiver.  
Reflectivity  (designated  by  the  letter  Z)  covers  a  wide 
range  of  signals  (from  very  weak  to  very  strong).  So,  a 
more  convenient  number  for  calculations  and  compari-
son, a decibel (or logarithmic) scale (dBZ), is used. The 
dBZ values increase as the strength of the signal returned 
to the radar increases. 

Summary of Contents for G1000 Series



















































































































































































































































































































































Reviews:

No comments

Related manuals for G1000 Series

Panasonic CZ-RTC5B Installation Instructions Manual preview
CZ-RTC5B
Brand: Panasonic Pages: 15
Panasonic CZ-RTC3 Operating Instructions Manual preview
CZ-RTC3
Brand: Panasonic Pages: 42
D+H RZN 4503-T Instructions For Use Manual preview
RZN 4503-T
Brand: D+H Pages: 14
IFM Electronic Ecomot300 AC2630 Supplementary Device Manual preview
Ecomot300 AC2630
Brand: IFM Electronic Pages: 111
Sakura Seiki Tissue-Tek TEC 6 Operating Manual preview
Tissue-Tek TEC 6
Brand: Sakura Seiki Pages: 6
Burlington SP697 Installation Instruction preview
SP697
Brand: Burlington Pages: 7
Mesa 7I76 Manual preview
7I76
Brand: Mesa Pages: 58
Trane Technologies BAYSTAT033AC Installation Manual preview
BAYSTAT033AC
Brand: Trane Technologies Pages: 8
Daspi PIXELP Instruction Manual preview
PIXELP
Brand: Daspi Pages: 16
Daikin BRC7E63W Operation Manual preview
BRC7E63W
Brand: Daikin Pages: 16
M-system R7L-DC16A-R Instruction Manual preview
R7L-DC16A-R
Brand: M-system Pages: 19
EDI SmartMonitor MMU2-16LE Series Operation Manual preview
SmartMonitor MMU2-16LE Series
Brand: EDI Pages: 62
Navilock 62745 Manual preview
62745
Brand: Navilock Pages: 14
Feig Electronic ISC.ANT.U500/270DM-E Manual preview
ISC.ANT.U500/270DM-E
Brand: Feig Electronic Pages: 117
CTE ZED 20.3 HV Instructions For Use And Maintenance Manual preview
ZED 20.3 HV
Brand: CTE Pages: 130
JBSYSTEMS Light SCENE MASTER - V1.0 Operation Manual preview
SCENE MASTER - V1.0
Brand: JBSYSTEMS Light Pages: 24
CALEFFI AIR190002 Quick Start Manual preview
AIR190002
Brand: CALEFFI Pages: 14
Gira 5350 10 Operating Instructions Manual preview
5350 10
Brand: Gira Pages: 7

Brands by name

Popular brands

Load more brands