Garmin G1000 Series, Pilot'S Manual

Page: 61 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-33
PRIMARY FLIGHT DISPLAY
To select a Direct-to from the Nearest Air-
ports list:
1. Press the
Direct-to
key, then turn the
large FMS
knob to highlight the NRST field.
2. Turn the small FMS knob to display a selection
window showing the 25 nearest airports.
3. Turn the FMS knob to scroll through the list
and highlight the desired airport, then press
the ENT key.
4. Press the ENT key again to activate the direct-to.
To select a specific course to a waypoint:
1. Press the Direct-to key, then turn the FMS knobs
to select the desired destination waypoint, then
press the ENT key.
2. Turn the large FMS knob to highlight the ‘CRS’
field. Turn the
FMS
knobs to select the desired
course and press the ENT key.
3. Press the ENT key to activate the direct-to using
the selected course to the destination.
To cancel a Direct-to:
1. Press the
Direct-to
key, then press the
MENU
key to display the Direct-to Options Menu.
2. Press the ENT key to cancel direct-to navigation.
If a flight plan is still active, the G1000 resumes
flight plan navigation along the closest leg.
Figure 2-51 Cancel Direct-To NAV
Flight Plan Window
NOTE: COM frequency and stored flight plans
cannot be loaded from the PFD Flight Plan
Window.
The Flight Plan Window is enabled/disabled by press-
ing the FPL key.
Figure 2-52 Flight Plan Window
Flight plans can be created, edited and activated from
the PFD. The G1000 allows for the creation of up to 99
flight plans, with up to 31 waypoints in each flight plan.
The Flight Plan Window on the PFD displays the fol-
lowing information:
• Flight plan title
• Indication of the active leg (magenta line and arrow)
• Flight plan waypoints, including airport identifiers
• Leg distance
• Leg desired track
The following options are available for the Flight Plan
Window:
• Create New Flight Plan
• Activate Leg
• Store Flight Plan
• Invert Flight Plan
• Delete Flight Plan
• Load Departure