Galaxy Control Systems 635 Series Installation/Configuration Manual Download Page 3

Page: 3 / 212

System Galaxy

635-600 Series

Hardware Manual

COVERING:

600 & 635

CPU

600 & 635 DPI/DRM

Rev. E/F

DIO - Rev. C / D

DSI - Rev. B/C

Relay Board – all revisions

Information in this document is subject to change without notice.

Therefore, no claims are made as to the accuracy or completeness of this document.

Integrated applications and 3

Party Technologies my have additional requirements.

At the time this manual is published, all 600-series Hardware is compatible with System

Galaxy 11 software. See the board compatibility section in this guide to determine older-

model board pairing requirements and upgrade path. Check the Galaxy Tech support

website for the latest updates and flash compatibility information. Visit us at

www.galaxysys.com

11th Edition, Jan 2019



Galaxy Control Systems



Revision 11.1.0.2

No part of this document may be reproduced, copied, adapted, or transmitted, in any form

or by any means, electronic or mechanical, for any purpose, without the express written

consent of Galaxy Control Systems. Copyright protection claims include all forms and

matters of copyrighted material and information, including but not limited to, material

generated from the software programs, which are displayed on the screen such as icons,

look and feel, etc.

Trademarks

Galaxy Control Systems makes every effort to provide disclosures when referencing

products that are trademarked by other companies. The publisher states that it is

referencing product names solely for editorial purposes, and to the benefit of the trademark

owners with no intent to infringe upon said trademarks.

The following trademarks are referenced in this manual:

Microsoft

, Windows

, MSDE

and SQL Server

are registered trademarks of Microsoft

Corporation in the U.S. and other countries.
HID

, HID iCLASS

, and HID Corporate 1000

are registered trademarks or logos of HID Global

Corporation.

Farpointe logo and Farpointe Data are registered trademarks of Farpointe Data, Inc.

SAGEM and MORPHO logos and MORPHO

, MorphoAccess

, SIGMA, Sagem, Invixium,

Bioscrypt

are trademarks of their respective owners in the U.S. and abroad.

Adobe

and Acrobat

are registered trademarks of Adobe Systems Inc.

Galaxy Control Systems

3 North Main Street

Walkersville MD 21793

www

galaxysys

com

Summary of Contents for 635 Series





















































































































































































































Search results

Summary of Contents for 635 Series

Reviews:

Related manuals for 635 Series

Brands by name

Popular brands

Galaxy Control Systems 635 Series, Installation/Configuration Manual

Search results

Summary of Contents for 635 Series

Reviews:

Related manuals for 635 Series

Brands by name

Popular brands