635/600-SERIES HARDWARE INSTALL GUIDE
Chapter-Page
1-32
1.18
General FAQs about Features of Galaxy Hardware
System Galaxy 10 software allows both 508i Loops and 635/600 Loops at the same site; however
the 508i and 600 panels cannot be mixed into the same loop
.
The 635/600-series Controller does not communicate with 508i controllers or 508i loops.
The 635/600-series Controller communicates with other 635/600-series Controllers that are in the
same loop/cluster provided the Event Service is online.
This is known as
global event traffic
(or panel-
to-panel communication) - supports functionality like pass-back, door interlock, Inputs & Outputs (I/O), etc.
635/600-series Controllers cannot pass events to panels that are in a different Loop/cluster.
600-series Panels communicate using TCP/IP with 10 MB/Full Duplex.
635-series Panels communicate using TCP/IP with 100 MB/Full Duplex.
The 600 DPI-Reader board interfaces with current reader technologies
supported by System Galaxy.
Each board supports 2 readers; a lock relay and 2nd relay for both readers (4 relays total).
635 DPIs are cross-compatible with all other boards. 635 DPIs additionally offer wet-lock relay
operation – see the Appendix for 635 Wiring to see this.
The 600 DIO board has 8 max inputs and 4 max outputs.
The 600 DIO board supports Supervised inputs
(e.g. series (in-line), parallel (end of line), or series-
parallel resisters). Once the resisters are installed the feature is programmed in the Inputs Properties
screen, which offers the common industry standard resistor values.
The 600 DIO board supports HYPERVISION,
which is an added layer of supervision to prohibit
supervised circuits from being defeated. Hypervision is enabled via the software programming screen.
The 600 DSI board supports Cypress clock on RS-485 channel.
The 600 DSI board supports Schlage Wireless™ Access PIM-485 on the RS-485 channel.
The 600 DSI board supports the 600 Relay board on the RS-485 port.
The relay boards can be daisy-
chained and limits apply based on whether they are used for general output or elevators.
The 600 Relay boards support General Output and Elevator Control.
