600-SERIES HARDWARE MANUAL
Appendix Q - 635 DPI Installation
[STEP 9] LAND WIRING for POWER
1. 635 DPI using DRY CONTACT RELAY OPERATION -
If you are replacing an existing DPI, your
power connector should already be wired as you will need it. 600 DPI only supports dry contact
operation. SEE ADDITIONAL RELAY DIAGRAMS.
CAUTION:
Use
the
3
‐
pin
connector
provided
with
the
board
so
that
you
correctly
align
the
connector.
Be
careful
to
correctly
land
power
and
ground.
Misaligning
the
power
connector
could
cause
human
electrical
hazard
or
damage
to
equipment
connector.
2. 635 DPI using WET CONTACT RELAY OPERATION - Carefully wire the lock power to the LPR
terminal. Common the negative to the GND terminal.
[STEP 10] CONNECT DPI POWER
1. Plug in the DPI power connector. Take care to align the pins correctly.
APPENDIX-Page
Q-16
