page
~
vii
Table 18: BINARY ADDRESS TABLE FOR 635-DRM
2-23
Table 19: DSI Max. Number of Devices and Device Count for each Section
2-29
Table 20: Examples of DSI Sections Functioning Independently
2-30
Table 21: Mapping the DSI “Section Use” in the SG Software
2-30
Table 22: SET THE TERMINATION JUMPERS FOR EACH SECTION
2-31
Table 23: SET THE PASS-THRU JUMPERS FOR EACH SECTION
2-32
Table 24: BINARY ADDRESS TABLE FOR 635-DRM
2-33
Table 25: BINARY ADDRESS TABLE FOR OUTPUT RELAY BOARD
2-38
Table 26: WIRING PINOUT FROM 635-DSI TO FIRST RELAY BOARD
2-42
Table 27: WIRING PINOUT FROM ONE RELAY BOARD TO NEXT RELAY BOARD
2-42
Table 28: BINARY DIPSWITCH SETTINGS FOR INPUT BOARD
2-46
Table 29: WIRING PINOUT FROM THE 635-DSI TO FIRST INPUT BOARD
2-51
Table 30: WIRING PINOUT FROM ONE INPUT BOARD TO NEXT INPUT BOARD
2-51
Table 31: FLASH VERISON CHART
2-62
Table 32: WIRING DISTANCES FOR HARDWARE
2-67
Table 33: Software Setup - Process for 600 Loops are as follows
2-81
