2. PLOTTER DISPLAY OVERVIEW
2-11
amond. You can scale the diamond to match the size of your fishing net. The an-
gles for casting net is displayed at the top left of the screen. To change the size of
the diamond, see "How to change the size of the diamond cursor" on page 2-12.
How to disable unnecessary cursors
1. Press the
MENU
key to open the main menu.
2. Select [8. PLOTTER DISPLAY SETTING].
3. Select [4. SPECIAL CURSOR].
4. Select [CURSOR DISPLAY METHOD] on page 1.
5. Select [CIRCLE], [PARALLEL], [DIAMOND] or [ALL]. Only the selected cursor is
made available when pressing the
CURSOR SEL
key. For example, when select-
ing [CIRCLE], the cursor configuration changes as follows:
Circle
→
Crossing line / cross-hair
→
Circle
→
…
Select [ALL] to turn on all cursor configurations.
6. Press the
DISP
key to close the menu.
How to set the orientation method and the number of parallel index lines
1. Press the
MENU
key to open the main menu.
2. Select [8. PLOTTER DISPLAY SETTING].
3. Select [4. SPECIAL CURSOR].
4. Select [DIRECTION] in [PI LINE] on page 1.
5. Select the orientation method.
[STARBOARD]: Displays parallel index lines to starboard.
[PORT]: Displays parallel index lines to port.
[PORT AND STARBOARD]: Displays parallel index lines to port and starboard.
6. Select [NO. OF LINES] in [PI LINE] on page 1.
7. Select the number of parallel index lines.
8. Press the
DISP
key to close the menu.
Press
.
Press
.
[SPECIAL CURSOR] menu: Page 1
[SPECIAL CURSOR] menu: Page 2
Own ship
mark
Parallel index line cursor
[DIRECTION]: [STARBOARD],
[NO. OF LINES]: [TWO LINES]
[DIRECTION]: [PORT],
[NO. OF LINES]: [THREE LINES]
[DIRECTION]: [PORT AND STARBOARD],
[NO. OF LINES]: [ONE LINE]
