APPENDIX 1 MENU TREE
AP-8
3. FUNC. KEY/
F1 KEY (WAYPOINT LIST, ROUTES LIST, SAVE USB MEMORY, READ USB MEMORY,
RCU SETTING
INTERNAL MEMORY RECORDING, INTERNAL MEMORY PLAYBACK,
TRF USB TO INT MEMORY, DISPLAY INTERNAL MEMORY, MARK LINE TYPE,
DISPLAY AIS TRACK, DISPLAY CNSRT TRACK, DISPLAY TT TRACK,
DISPLAY GPS BUOY TRK, EDIT MARK, DELETE MARK, INPUT MARK, EDIT TRACK,
DELETE TRACK, DELETE ALL TRACK, ALARM SETTING, NAV AIDS DISPLAY,
CONTOUR LINE DISPLAY, RESET TRIP LOG, DELETE OTHER SHIPS’ TRACK,
SCREENSHOT,
REDO
, CHANGE OPERATION DISPLAY)
F2 KEY (Same as F1 KEY.;
SCREENSHOT
)
F3 KEY (Same as F1 KEY.;
WAYPOINT LIST
)
F4 KEY (Same as F1 KEY.;
DELETE TRACK
)
F5 KEY (Same as F1 KEY.;
MARK LINE TYPE
)
RCU KEY A (No use.)
RCU KEY B (No use.)
4. DISPLAY
1 (to 5). DISPLAY 1 (to 5) SETTING
SETTING
SPLIT PATTERN (
NO SPLIT
, VERT SPLIT 1:1, VERT SPLIT 1:2, VERT SPLIT 1:3,
VERT SPLIT 2:1, VERT SPLIT 3:1, HOR SPLIT 1:1, HOR SPLIT 1:2,
HOR SPLIT 1:3, HOR SPLIT 2:1, HOR SPLIT 3:1)
DISPLAY SCREEN* (
PLOTTER DISPLAY
, COMPASS DISPLAY*)
NAV/DEST INFO
SELECT INFO (
INFO1
, INFO2)
INFO DSP POS (
UPPER SIDE
, LOWER SIDE, WITHOUT)
6. DISPLAY CHANGE SETTING
DISPLAY 1 (
DISPLAY
)
DISPLAY 2 (to 5) (
DISPLAY
, SKIP)
7. NAVIGATION INFO. 1 SETTING (Select from PATTERN LIST and NAV DATA.)
8. NAVIGATION INFO. 2 SETTING (Select from PATTERN LIST and NAV DATA.)
9. WAYPOINT INFORMATION 1 SETTING (Select from PATTERN LIST and NAV DATA.)
0. WAYPOINT INFORMATION 2 SETTING (Select from PATTERN LIST and NAV DATA.)
5. INPUT/
1. PORT 1 SETTING
OUTPUT
CONNECTED DEVICE (
NORMAL
, RADIO EQUIPMENT, AIS, GPS BUOY, AUTO PILOT, RTCM)
PORT SETTING
FORMAT (
NMEA0183 ver1.5
, NMEA0183 ver2.0, NMEA0183 ver3.0, NMEA0183 ver4.1)
BAUD RATE (4800,
38400
)
ACCEPT TLL WITH NO. (ON,
OFF
)
TLL OUTPUT (
ON
, OFF)
LAT/LON FORMAT (DD°MM.MM’,
DD°MM.MMM’
, DD°MM.MMMM’)
OUTPUT WAYPOINT (ON,
OFF
)
OUTPUT CONSORT INFO.* (ON,
OFF
)
OUTPUT RADIO MESSAGE* (ON,
OFF
)
DATUM SELECTION (
WGS-84
, TOKYO)
2. PORT 1 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
3. PORT 2 SETTING (Same as PORT 1 SETTING.)
4. PORT 2 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
5. PORT 3 SETTING (Same as PORT 1 SETTING.)
6. PORT 3 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
7. ETHERNET SETTING
IP
ADDRESS
SUBNET MASK
DEFAULT GATEWAY
FA-30 IP ADDRESS
8. FA-30 SETTING
9. SHOW NMEA2000 DEVICES
0. NMEA2000 PGN (Select OUTPUT or NO OUTPUT for each PGN.)
2
2
*: Compass display
is available on the
upper side of the
screen only with
HOR SPLIT 1:1.
*: No use.
