10. HOW TO RECORD, PLAY BACK DATA
10-8
6. Select [ADD] or [OVERWRITE] depending on the item selected at step 5.
[ADD]: Adds the selected data to the current display data.
[OVERWRITE]: Overwrites the current display data.
Note:
When setting [RECORD MARK/TRACK] to [ADD], the selected data can
not be added if the memory capacity is reached (30,000). For [REC OWN TRK] or
[REC OTHR TRK], the oldest data is erased to make room for the latest. For ex-
ample, when 25,000 track points for own ship are added to the current 10,000
track points, the old 5,000 track points of the current 10,000 track points are
erased. Then 25,000 track points are added to the remaining 5,000 track points.
7. Repeat step 5 and step 6 to replay other data.
8. Select [SEL DATUM].
9. Select [WGS-84] or [TOKYO].
10. Select the file to replay from [DATA SELECTION]. The message "LOAD FILE.
ARE YOU SURE? (THE SYSTEM WILL REBOOT WHEN THE FILE IS LOAD-
ED.)" appears.
11. Select [RUN] to replay the data, which takes max. one minute. When the screen-
shot data is large, more time is necessary. For screenshot procedures, see
section 10.5.
12. Push the
ENTER
knob.
13. Press the
DISP
key to close the menu.
10.3.5
How to transfer the data from the USB flash memory
Data in the USB flash memory can be transferred to the internal memory.
1. Connect a USB flash memory in the USB drive.
2. Press the
MENU
key to open the main menu.
3. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
4. Select [5. TRF USB TO INT MEMORY].
2000
1500
1300
70
20
2150
1650
1350
85
22
2700
1900
1800
135
27
3500/30000
700/10000
900/10000
800/10000
500/10000
2000/30000
20150101130027.csv
20150101130028.csv
20150101130029.csv
