Field
Description
The dialling break is needed as the device does not recognise
the external dialling tone. As not every analogue exchange
takes the call directly after the receiver is lifted, a manual break
is inserted here. You have to determine the break before dialling
starts. Enter the time in seconds after which the device is to
start dialling the external number.
Possible values are
to
.
The default value is
.
End of dialling monitor-
ing timer
Only for Access Configuration =
#@0
.
To identify that dialling of a telephone number has ended, the
end of dialling monitoring timer is started after each digit
entered. As soon as this timer has expired, the device starts di-
alling. Only change the basic timer setting if absolutely neces-
sary. The time is specified in seconds.
Possible values are
to
+
.
The default value is
.
14.2.2 External Numbers
Regardless of whether you have chosen point-to-point, point-to-multipoint or an analogue
connection (POTS), external telephone numbers need to be entered. You can assign these
numbers to individual internal subscribers in the subsequent configuration.
If
#@0
is selected in the Access Configuration menu, the following options are available:
14 PBX
Funkwerk Enterprise Communications GmbH
302
funkwerk TR200aw/bw
