Funkwerk TR200aw User Manual Download Page 75

Page: 75 / 487

3.5.9.2 Performance features of the telephone functions

• Making a call anonymously.

• Station guarding.

• Taking an answering machine call.

• Call forwarding over the PBX or with keypad function in the exchange.

• Displaying the caller's number

• Connection for device type multifunctional unit/fax/telephone/answering machine/mo-

dem/door intercom adapter.

• Outputting tariff information.

• Automat. callback (CCBS/CCNR).

• Automatic outside line.

• User-defined character transmission (UUS1).

• Authorisations for terminals.

• CAPI.

• Boss/Sec. functions on a system telephone.

• Data protection for fax and modem.

• Data backup in the event of power failure.

• Date/time transfer.

• Direct call.

• Three-party conference.

• Configurable terminal type.

• Remote configuration.

• Detection of malicious callers.

• Follow me internal.

• Forwarding calls to internal and external subscribers.

• Call pickup.

• Making internal calls.

• Speeddial number.

• Calling several telephones.

• Internal and external brokering.

• Netz-Direkt (keypad)

• Emergency numbers (10).

• Emergency functions/priority for emergency calls (ISDN only).

Funkwerk Enterprise Communications GmbH

3 User's guide for telephone functions

funkwerk TR200aw/bw

Summary of Contents for TR200aw








































































































































































































































































































































































































































































































Search results

Summary of Contents for TR200aw

Reviews:

Related manuals for TR200aw

Brands by name

Popular brands

Funkwerk TR200aw, User Manual

Search results

Summary of Contents for TR200aw

Reviews:

Related manuals for TR200aw

Brands by name

Popular brands