Field
Description
Challenge Handshake Authentication Protocol).
•
,04A#$
: Run MS-CHAP version 2 only.
Encryption
Only for PPP Authentication =
,04A#$
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. This is only possible if
STAC or MS-STAC compression is not activated for the con-
nection. If Encryption is set, the remote terminal must also sup-
port it, otherwise a connection cannot be set up.
Possible values:
•
.
(default value) MPP encryption is not used.
•
%
. MPP encryption V2 with 128 bit is used to RFC
3078.
•
2* )/"
: MPP encryption V2 with 128 bit is
used as compatible with Microsoft and Cisco.
Callback Mode
Select the Callback Mode function.
Possible values:
•
.
(default value) Your device does not call back.
•
)"$
: Select one of the following options:
•
. ### .""
: Your device calls the connection
partner to request a callback.
•
2* 4" ,
: Your device calls the connection
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
#**$
: Select one of the following options:
•
### ."" 4!9
: Your device calls back im-
mediately when requested to do so by the connection part-
ner.
•
2* 0$ ,
: Your device calls back after a
period of time proposed by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the subscriber
number (Entries-> Number (MSN)) with the Mode
@"
or
B"&
that has been entered for the other party. If no
number is entered, the required number can be reported by
the caller in a PPP negotiation. This setting should be
11 WAN
Funkwerk Enterprise Communications GmbH
212
funkwerk TR200aw/bw
