manualshive.com logo in svg

Fujitsu PRIMERGY RX350 S8, Upgrade And Maintenance Manual

The Fujitsu PRIMERGY RX350 S8 is a high-performance server designed for businesses. Ensure smooth operations with the comprehensive Upgrade and Maintenance Manual, available for free download at manualshive.com. This essential manual provides all the necessary information for upgrading and maintaining your PRIMERGY RX350 S8, making it a valuable resource for maximizing its performance and longevity.

Share
Download
background image

TX300 S8 / RX350 S8

Upgrade and Maintenance Manual

15

Inhalt

7.4.5

Installing the 4x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  . 295

7.4.5.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 295

7.4.5.2

Removing accessible drive dummy covers   .  .  .  .  .  .  .  .  . 295

7.4.5.3

Installing the slimline ODD into the HDD extension box  .  .  . 295

7.4.5.4

Installing the 4x 3.5-inch HDD extension box   .  .  .  .  .  .  .  . 296

7.4.5.5

Cabling the 4x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  . 297

7.4.5.6

Installing HDD modules into the 4x 3.5-inch HDD 
extension box   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 298

7.4.5.7

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 298

7.4.6

Removing the 4x 3.5-inch HDD extension box   .  .  .  .  .  .  .  .  . 298

7.4.6.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 298

7.4.6.2

Removing the 4x 3.5-inch HDD extension box .  .  .  .  .  .  .  . 299

7.4.6.3

Installing accessible drive dummy covers  .  .  .  .  .  .  .  .  .  . 300

7.4.6.4

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 300

7.4.7

Replacing the 4x 3.5-inch HDD extension box   .  .  .  .  .  .  .  .  . 300

7.4.7.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 300

7.4.7.2

Removing the 4x 3.5-inch HDD extension box .  .  .  .  .  .  .  . 301

7.4.7.3

Removing the slimline ODD from the defective 
HDD extension box   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 301

7.4.7.4

Installing the slimline ODD and LSD module into the new 
HDD extension box   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 301

7.4.7.5

Installing the 4x 3.5-inch HDD extension box   .  .  .  .  .  .  .  . 301

7.4.7.6

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 301

7.4.8

Installing the 8x 2.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  . 302

7.4.8.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 302

7.4.8.2

Removing accessible drive dummy covers   .  .  .  .  .  .  .  .  . 302

7.4.8.3

Installing the 8x 2.5-inch HDD extension box   .  .  .  .  .  .  .  . 303

7.4.8.4

Cabling the 8x 2.5-inch HDD extension box  .  .  .  .  .  .  .  .  . 304

7.4.8.5

Installing HDD modules into the 8x 2.5-inch HDD 
extension box   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 305

7.4.8.6

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 305

7.4.9

Removing the 8x 2.5-inch HDD extension box   .  .  .  .  .  .  .  .  . 306

7.4.9.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 306

7.4.9.2

Removing the 2x 3.5-inch HDD extension box .  .  .  .  .  .  .  . 306

7.4.9.3

Installing accessible drive dummy covers  .  .  .  .  .  .  .  .  .  . 307

7.4.9.4

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 308

7.4.10

Replacing the 8x 2.5-inch HDD extension box   .  .  .  .  .  .  .  .  . 308

7.4.10.1

Preliminary steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 308

7.4.10.2

Removing the 8x 2.5-inch HDD extension box .  .  .  .  .  .  .  . 309

7.4.10.3

Installing the 8x 2.5-inch HDD extension box   .  .  .  .  .  .  .  . 309

7.4.10.4

Concluding steps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 309

Summary of Contents for PRIMERGY RX350 S8

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PRIMERGY RX350 S8

AIC CB201-Z1 User Manual preview
CB201-Z1
Brand: AIC Pages: 52
Avaya 2N Helios IP Application Notes preview
2N Helios IP
Brand: Avaya Pages: 19
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
Sun Microsystems Sun Fire V20z Replacing preview
Sun Fire V20z
Brand: Sun Microsystems Pages: 4
Silex technology Silex Pricom SX-2000U2 Technical Specifications preview
Silex Pricom SX-2000U2
Brand: Silex technology Pages: 1
TYANO TS65A-B8036 Service Engineer'S Manual preview
TS65A-B8036
Brand: TYANO Pages: 102
Planet FPS-1101 User Manual preview
FPS-1101
Brand: Planet Pages: 83
Axis 540 series User Manual preview
540 series
Brand: Axis Pages: 168
EVS XSnano Configuration Manual preview
XSnano
Brand: EVS Pages: 198
GeoVision GV-Video Server User Manual preview
GV-Video Server
Brand: GeoVision Pages: 179
Mirapoint 7700 Series Hardware Manual preview
7700 Series
Brand: Mirapoint Pages: 76
IBM 4348 User Manual preview
4348
Brand: IBM Pages: 70
GRASS VALLEY K2 SOLO - Service Manual preview
K2 SOLO -
Brand: GRASS VALLEY Pages: 106
Thales SafeNet ProtectServer Network HSM 5.9 Installation And Configuration Manual preview
SafeNet ProtectServer Network HSM 5.9
Brand: Thales Pages: 37
Lantronix Console Server 3200 User Manual preview
Console Server 3200
Brand: Lantronix Pages: 88
Gigabyte GR-NR145D System Installation Manual preview
GR-NR145D
Brand: Gigabyte Pages: 22
Inspur NF5180M6 Installation Manual preview
NF5180M6
Brand: Inspur Pages: 3
IBM 8408-44E Site And Hardware Planning preview
8408-44E
Brand: IBM Pages: 206

Brands by name

Popular brands

Load more brands