manualshive.com logo in svg

Fujitsu PRIMERGY RX350 S8, Upgrade And Maintenance Manual

The Fujitsu PRIMERGY RX350 S8 is a high-performance server designed for businesses. Ensure smooth operations with the comprehensive Upgrade and Maintenance Manual, available for free download at manualshive.com. This essential manual provides all the necessary information for upgrading and maintaining your PRIMERGY RX350 S8, making it a valuable resource for maximizing its performance and longevity.

Share
Download
background image

14

Upgrade and Maintenance Manual

 

TX300 S8 / RX350 S8

Inhalt

7.3.10

Upgrading to 8x 3.5-inch HDD configurations   .  .  .  .  .  .  .  .  .  272

7.3.10.1

Preliminary steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  272

7.3.10.2

Removing the 3.5-inch HDD bay top cover  .  .  .  .  .  .  .  .  .  273

7.3.10.3

Removing the 4x 3.5-inch HDD front panel  .  .  .  .  .  .  .  .  .  276

7.3.10.4

Mounting the second 3.5-inch HDD backplane  .  .  .  .  .  .  .  277

7.3.10.5

Installing the 8x 3.5-inch HDD front panel .  .  .  .  .  .  .  .  .  .  279

7.3.10.6

Mounting the 3.5-inch HDD bay top cover   .  .  .  .  .  .  .  .  .  281

7.3.10.7

Cabling the SAS backplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  283

7.3.10.8

Concluding steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  283

7.4

HDD extension boxes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  284

7.4.1

HDD extension box overview .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  284

7.4.1.1

8x 2.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  284

7.4.1.2

2x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  285

7.4.1.3

4x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  286

7.4.2

Installing the 2x 3.5-inch HDD extension box .  .  .  .  .  .  .  .  .  .  287

7.4.2.1

Preliminary steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  287

7.4.2.2

Removing accessible drive dummy covers  .  .  .  .  .  .  .  .  .  287

7.4.2.3

Installing the slimline ODD and LSD module into the 
HDD extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  287

7.4.2.4

Installing the 2x 3.5-inch HDD extension box .  .  .  .  .  .  .  .  288

7.4.2.5

Cabling the 2x 3.5-inch HDD extension box   .  .  .  .  .  .  .  .  289

7.4.2.6

Installing HDD modules into the 2x 3.5-inch HDD 
extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  290

7.4.2.7

Concluding steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  290

7.4.3

Removing the 2x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  291

7.4.3.1

Preliminary steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  291

7.4.3.2

Removing the 2x 3.5-inch HDD extension box  .  .  .  .  .  .  .  291

7.4.3.3

Installing accessible drive dummy covers .  .  .  .  .  .  .  .  .  .  292

7.4.3.4

Concluding steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  293

7.4.4

Replacing the 2x 3.5-inch HDD extension box  .  .  .  .  .  .  .  .  .  293

7.4.4.1

Preliminary steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  293

7.4.4.2

Removing the 2x 3.5-inch HDD extension box  .  .  .  .  .  .  .  294

7.4.4.3

Removing the slimline ODD and LSD module from the 
defective HDD extension box  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  294

7.4.4.4

Installing the slimline ODD and LSD module into the 
new HDD extension box .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  294

7.4.4.5

Installing the 2x 3.5-inch HDD extension box .  .  .  .  .  .  .  .  294

7.4.4.6

Concluding steps   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  294

Summary of Contents for PRIMERGY RX350 S8

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PRIMERGY RX350 S8

Quantum NDX Series Installation Manual preview
NDX Series
Brand: Quantum Pages: 14
Flexport HF2211 User Manual preview
HF2211
Brand: Flexport Pages: 39
IBM Power 780 Technical Overview And Introduction preview
Power 780
Brand: IBM Pages: 220
IBM 88861TU Installation And User Manual preview
88861TU
Brand: IBM Pages: 82
Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 User Manual preview
EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0
Brand: Edimax Pages: 118
PCI Mini-101M User Manual preview
Mini-101M
Brand: PCI Pages: 87
Red Hat 8.1 Installation Manual preview
8.1
Brand: Red Hat Pages: 120
AAxeon STW-602C User Manual preview
STW-602C
Brand: AAxeon Pages: 74
IBM @server iSeries User Manual preview
@server iSeries
Brand: IBM Pages: 294
Red Hat NETWORK PROXY SERVER 4.0 - Installation Manual preview
NETWORK PROXY SERVER 4.0 -
Brand: Red Hat Pages: 44
Supermicro Supero H8DA8-2 User Manual preview
Supero H8DA8-2
Brand: Supermicro Pages: 82
Mirapoint RazorSafe 700 Hardware Manual preview
RazorSafe 700
Brand: Mirapoint Pages: 98
3onedata CP202-2CI User Manual preview
CP202-2CI
Brand: 3onedata Pages: 4
VVDN Technologies DT4CS User'S Manual Manual preview
DT4CS
Brand: VVDN Technologies Pages: 35
Iomega 1562 Installation Manual preview
1562
Brand: Iomega Pages: 23
Oracle SPARC T7-2 Service Manual preview
SPARC T7-2
Brand: Oracle Pages: 188
Supermicro SUPERSERVER 1028TR-T User Manual preview
SUPERSERVER 1028TR-T
Brand: Supermicro Pages: 144
Gateway 7210 System Manual preview
7210
Brand: Gateway Pages: 157

Brands by name

Popular brands

Load more brands