manualshive.com logo in svg

Fujitsu PRIMERGY RX350 S8, Upgrade And Maintenance Manual

The Fujitsu PRIMERGY RX350 S8 is a high-performance server designed for businesses. Ensure smooth operations with the comprehensive Upgrade and Maintenance Manual, available for free download at manualshive.com. This essential manual provides all the necessary information for upgrading and maintaining your PRIMERGY RX350 S8, making it a valuable resource for maximizing its performance and longevity.

Share
Download
background image

10

Upgrade and Maintenance Manual

 

TX300 S8 / RX350 S8

Inhalt

5.2

Completing the maintenance task  .  .  .  .  .  .  .  .  .  .  .  .  .  .  134

5.2.1

Updating or recovering the system board BIOS and iRMC .  .  .  134

5.2.1.1

Updating or recovering the system board BIOS .  .  .  .  .  .  .  134

5.2.1.2

Updating or recovering the iRMC  .  .  .  .  .  .  .  .  .  .  .  .  .  .  134

5.2.2

Verifying system information backup / restore   .  .  .  .  .  .  .  .  .  136

5.2.3

Updating RAID controller firmware  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  137

5.2.4

Enabling Option ROM scan .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  138

5.2.5

Verifying and configuring the backup software solution .  .  .  .  .  139

5.2.6

Resetting the boot retry counter   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  140

5.2.6.1

Viewing the boot retry counter   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  140

5.2.6.2

Resetting the boot retry counter .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  140

5.2.7

Resetting the error status after replacing memory modules 
or processors  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  142

5.2.7.1

Memory modules   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  142

5.2.7.2

Processors   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  143

5.2.8

Performing a fan test after replacing a defective fan  .  .  .  .  .  .  145

5.2.9

Enabling SVOM boot watchdog functionality  .  .  .  .  .  .  .  .  .  .  146

5.2.10

Enabling replaced components in the system BIOS  .  .  .  .  .  .  147

5.2.11

Verifying the memory mode .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  147

5.2.12

Verifying the system time settings   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  148

5.2.13

Viewing and clearing the System Event Log (SEL) .  .  .  .  .  .  .  149

5.2.13.1

Viewing the SEL .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  149

5.2.13.2

Clearing the SEL   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  150

5.2.14

Updating the NIC configuration file in a Linux environment .  .  .  150

5.2.15

Resuming BitLocker functionality .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  152

5.2.16

Performing a RAID array rebuild  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  153

5.2.17

Looking up changed MAC / WWN addresses   .  .  .  .  .  .  .  .  .  153

5.2.17.1

Looking up MAC addresses .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  154

5.2.17.2

Looking up WWN addresses   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  154

5.2.18

Using the Chassis ID Prom Tool   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  155

5.2.19

Configuring LAN teaming .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  156

5.2.19.1

After replacing / upgrading LAN controllers .  .  .  .  .  .  .  .  .  157

5.2.19.2

After replacing the system board  .  .  .  .  .  .  .  .  .  .  .  .  .  .  157

5.2.20

Switching off the ID indicator  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  158

5.2.21

Specifying the chassis model .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  158

Summary of Contents for PRIMERGY RX350 S8

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PRIMERGY RX350 S8

NEC Express5800/320Ma Planning Manual preview
Express5800/320Ma
Brand: NEC Pages: 80
NEC Express5800/320Ma Technical Reference Manual preview
Express5800/320Ma
Brand: NEC Pages: 90
Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
Hanwha WRR-5301 Replacement Manual preview
WRR-5301
Brand: Hanwha Pages: 3
IBM BladeCenter S Installation And User Manual preview
BladeCenter S
Brand: IBM Pages: 84
IBM 9008-22L Manual preview
9008-22L
Brand: IBM Pages: 110
B.E.G. LUXOMAT net ViSTATION Quick Start Manual preview
LUXOMAT net ViSTATION
Brand: B.E.G. Pages: 4
Leightronix UltraNEXUS-HD Flex Product Quick Manual preview
UltraNEXUS-HD Flex
Brand: Leightronix Pages: 5
IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual preview
8676 - Eserver xSeries 335
Brand: IBM Pages: 172
Supermicro SUPERSERVER 5019S-M User Manual preview
SUPERSERVER 5019S-M
Brand: Supermicro Pages: 65
Tibbo TCP001 Manual preview
TCP001
Brand: Tibbo Pages: 12
Kathrein EXIP 414 Manual preview
EXIP 414
Brand: Kathrein Pages: 20
Supermicro SUPERSERVER 6026TT-IBQF User Manual preview
SUPERSERVER 6026TT-IBQF
Brand: Supermicro Pages: 100
Supermicro SuperServer 510P-WT User Manual preview
SuperServer 510P-WT
Brand: Supermicro Pages: 113
Supermicro SuperWorkstation 7049GP-TRT User Manual preview
SuperWorkstation 7049GP-TRT
Brand: Supermicro Pages: 133
QNAP GM-1000 User Manual preview
GM-1000
Brand: QNAP Pages: 53
Supero Supero SUPERSERVER 5015A-H User Manual preview
Supero SUPERSERVER 5015A-H
Brand: Supero Pages: 84
Supero SC216A-R1200LPB User Manual preview
SC216A-R1200LPB
Brand: Supero Pages: 97

Brands by name

Popular brands

Load more brands