manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

TPV/FTV Capacity Optimization

TPV/FTV capacity optimization can increase the unallocated areas in a pool (TPP/FTRP) by changing the physical
areas where 0 is allocated for all of the data to unallocated areas. This improves functional efficiency.
Once an area is physically allocated to a TPV/FTV, the area is never automatically released.
If operations are performed when all of the areas are physically allocated, the used areas that are recognized by
a server and the areas that are actually allocated might have different sizes.
The following operations are examples of operations that create allocated physical areas with sequential data to
which only 0 is allocated:

•

Restoration of data for RAW image backup

•

RAID Migration from Standard volumes to TPVs/FTVs

•

Creation of a file system in which writing is performed to the entire area

The TPV/FTV capacity optimization function belongs to Thin Provisioning. This function can be started after a tar-
get TPV/FTV is selected via ETERNUS Web GUI or ETERNUS CLI. This function is also available when the RAID Mi-
gration destination is a TPP or an FTRP.
TPV/FTV capacity optimization reads and checks the data in each allocated area for the Thin Provisioning func-
tion. This function releases the allocated physical areas to unallocated areas if data that contains all zeros is
detected.

Figure 24 TPV/FTV Capacity Optimization

0

0

0

0

TPV / FTV

LBA0

TPV / FTV

Release

Release

Release

Release

: Physically allocated area (data other than ALL0 data)

: Physically allocated area (ALL0 data)

: Unallocated area

21MB (*1)

*1: The allocated capacity varies depending on the TPP/FTRP capacity.

Before the process

Check

After the process

TPV/FTV capacity optimization may not be available when other functions are being used in the device or the
target volume.
For details on the functions that can be executed simultaneously, refer to 

"Combinations of Functions That Are

Available for Simultaneous Executions" (page 214)

.

2. Basic Functions

Operations Optimization (Virtualization/Automated Storage Tiering)
 

48

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

IBM DS8000 - ADDITIONAL INFORMATION Manual preview
DS8000 - ADDITIONAL INFORMATION
Brand: IBM Pages: 5
IBM System Storage TS7600 ProtecTIER Series Software Upgrade Manual preview
System Storage TS7600 ProtecTIER Series
Brand: IBM Pages: 132
IBM Storwize V7000 Troubleshooting And Maintenance Manual preview
Storwize V7000
Brand: IBM Pages: 188
IBM TotalStorage DS4800 Installation, User And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 250
IBM TotalStorage DS4800 User, Installation And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 234
IBM T400 Setup, Operation, And Service Manual preview
T400
Brand: IBM Pages: 136
IBM System Storage DS5020 Overview preview
System Storage DS5020
Brand: IBM Pages: 31
IBM Netfinity EXP300 Hardware Maintenance Manual preview
Netfinity EXP300
Brand: IBM Pages: 93
IBM DS4700 EXPRESS Installation, User'S, And Maintenance Manual preview
DS4700 EXPRESS
Brand: IBM Pages: 270
IBM Ultrastar 36LZX Quick Installation Manual preview
Ultrastar 36LZX
Brand: IBM Pages: 2
IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Specifications preview
DCAS-32160 - Ultrastar 2.1 GB Hard Drive
Brand: IBM Pages: 232
IBM System Storage TS3310 Maintenance Information preview
System Storage TS3310
Brand: IBM Pages: 531
Transcend SD80 Series Specification Sheet preview
SD80 Series
Brand: Transcend Pages: 23
Tennsco MB-3-2545 Assembly Instructions/Parts Manual preview
MB-3-2545
Brand: Tennsco Pages: 4
Synology DS3611xs Quick Installation Manual preview
DS3611xs
Brand: Synology Pages: 26
Western Digital My Book World Edition WDH1NC10000 Specifications preview
My Book World Edition WDH1NC10000
Brand: Western Digital Pages: 2
Rocstor ROCSERVE 4RMe Installation And Configuration Manual preview
ROCSERVE 4RMe
Brand: Rocstor Pages: 132
Brookstone 437590 User Giude preview
437590
Brand: Brookstone Pages: 8

Brands by name

Popular brands

Load more brands