manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

LAN for Remote Support (RMT Port)

When the network connection for the remote support needs to be separated from the company LAN, use the
RMT ports to connect to the remote support center via a different network.

■

AIS Connect Function

●

Overview of the AIS Connect Function

Figure 98 Overview of the AIS Connect Function

ETERNUS DX 

Encr

yp

ted

Diagnosis

Monitoring

AIS Connect 
server

Remote support center

Demilitarized zone

(DMZ)

Customer network

Internet

Customer

LAN

[Encrypted]

Access firewall

HTTPS tunnel

Fir
e

w

all

Fir
e

w

all

The diagram above describes the overview of the AIS Connect function. The left-hand side represents the cus-
tomer and the right-hand side represents the service provider. The connection set-up initiative is always from
the customer side based on regular AIS Connect agent contacts (Simple Object Access Protocol (SOAP) messag-
es) with the AIS Connect server that can be reached via the Internet.
AIS Connect agent requests to the AIS Connect server can be handled directly and immediately. AIS Connect serv-
er requests to the AIS Connect agent (remote access) cannot be sent until the next contact has been set up. If
remote access of the AIS Connect is enabled by the customer, the AIS Connect agent then executes the requests
from customer operations such as setting up a tunnel for "remote access" or initiating a file transfer.
Contact set-up and request processing are performed via an HTTPS tunnel. Under certain circumstances, the fire-
wall must be configured on the customer side to enable this type of tunnel to be set up. Likewise, proxies (plus
ID and password) can be specified during Internet access configuration.
AIS Connect agent can perform the following actions:

•

Notifying events (Information event, Warning event, or Error event) in the ETERNUS DX to the AIS Connect
server

•

Sending ETERNUS DX logs to the AIS Connect server

•

Remote access from the AIS Connect server to the ETERNUS DX

4. Connection Configuration

LAN Connection
 

155

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

M-system AB2 Instruction Manual preview
AB2
Brand: M-system Pages: 3
LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Brand: LaCie Pages: 22
Tandberg Data STORAGE CAB4000 - Quick Install Manual preview
STORAGE CAB4000 -
Brand: Tandberg Data Pages: 13
Frontier WB602201 Manual preview
WB602201
Brand: Frontier Pages: 6
Backyard YardLine ASTON Assembly Manual preview
YardLine ASTON
Brand: Backyard Pages: 60
GOO Air Disk User Manual preview
Air Disk
Brand: GOO Pages: 8
ABB MC502 Installation Instructions preview
MC502
Brand: ABB Pages: 2
Freecom DLT-V4 EZ-Kit Series Datasheet preview
DLT-V4 EZ-Kit Series
Brand: Freecom Pages: 2
Lenovo IBM Half-high LTO Generation 3 Product Manual preview
IBM Half-high LTO Generation 3
Brand: Lenovo Pages: 13
Lenovo F800 User Manual preview
F800
Brand: Lenovo Pages: 37
Lenovo Beacon Hardware Maintenance Manual preview
Beacon
Brand: Lenovo Pages: 46
Lenovo S3500 Product Manual preview
S3500
Brand: Lenovo Pages: 20
Lenovo IBM Storwize V7000 Product Manual preview
IBM Storwize V7000
Brand: Lenovo Pages: 30
Lenovo EMC2 px4-400r Quick Start Manual preview
EMC2 px4-400r
Brand: Lenovo Pages: 56
Lenovo DM7100H Installation And Setup Instructions preview
DM7100H
Brand: Lenovo Pages: 4
Lenovo 6099 Product Manual preview
6099
Brand: Lenovo Pages: 29
Lenovo IBM TS3100 Product Manual preview
IBM TS3100
Brand: Lenovo Pages: 23
Lenovo F410 User Manual preview
F410
Brand: Lenovo Pages: 52

Brands by name

Popular brands

Load more brands