manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

 

•

The performance may decline when the Deduplication/Compression function is enabled. Using the Dedupli-
cation/Compression function is not recommended for the volumes that are used to store performance-sensi-
tive data.

•

Batch process (or sequential access) performance significantly degrades because data is written to drives
intermittently or a large amount of references and updates occur. In environments where sequential access
occurs, using the Deduplication/Compression function is not recommended.

•

The Deduplication/Compression function becomes a disadvantage in terms of performance and capacity if a
volume stores data such as videos to which deduplication/compression is not effective and the volume is set
as a Deduplication/Compression Volume. Only enable either the Deduplication function or the Compression
function.

 

●

Configuration Method

•

Enabling the Deduplication/Compression function
From ETERNUS Web GUI or ETERNUS CLI, enable the Deduplication/Compression function for the TPP. Not only
can the Deduplication/Compression function be enabled, but the Deduplication function or the Compression
function can be individually enabled.
The Deduplication/Compression function can be enabled by performing one of the methods below.

Table 39 Method for Enabling the Deduplication/Compression Function

Condition of the TPP

Chunk size (*1)

Creation method

A newly created TPP

21MB

Select AUTO mode and specify an option
for the Deduplication/Compression func-
tion to enable the function (*2)

A TPP that is created with a controller
firmware version earlier than V10L70

21MB

Select a target TPP to enable the Dedu-
plication/Compression function (*3)

A TPP that is created with a controller
firmware version V10L70 and later (the
Dedup Ready setting is specified when
the TPP is created)

21MB

Select a target TPP to enable the Dedu-
plication/Compression function (*3) (*4)

A TPP that is created with a controller
firmware version V10L70 and later (the
Dedup Ready setting is not specified
when the TPP is created)

21MB

Select a target TPP to enable the Dedu-
plication/Compression function (*3) (*4)

Other than 21MB

Deduplication/Compression function can-
not be enabled (*5)

*1: The chunk size can be checked in the detail display of the TPP.
*2: This setting is available only if the TPP is created with the AUTO mode. In consideration of the load bal-

ancing for the Deduplication/Compression process, using this creation method is recommended. If the
TPP can only be configured with one RAID group, the Deduplication/Compression function cannot be ena-
bled.

*3: The Deduplication/Compression function can be enabled even if the TPP is configured with only one RAID

group. However, if the TPP is configured with one RAID group, the load of the Deduplication/Compression
processes cannot be balanced efficiently. Enabling the Deduplication/Compression function for a TPP that
is configured with two or more RAID groups is recommended.

*4: To create a TPP with a chunk size of 21MB, specify the Dedup Ready option when creating the TPP.
*5: This function cannot be performed if the chunk size of the TPP is not 21MB.

•

Configuration method for the Deduplication/Compression function
Select the TPP where the Deduplication/Compression function is enabled, and create Deduplication/Compres-
sion Volumes (TPVs) in the selected TPP.

3. SAN Functions

Operations Optimization (Deduplication/Compression)
 

115

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

ABSCO SHEDS 30302GK Manual preview
30302GK
Brand: ABSCO SHEDS Pages: 26
Navigloo 3120 Assembly Instructions Manual preview
3120
Brand: Navigloo Pages: 28
HOMCOM B71-048 Assembly & Instruction Manual preview
B71-048
Brand: HOMCOM Pages: 33
LaCie 301894 User Manual preview
301894
Brand: LaCie Pages: 22
E-Z-RECT TYPE 1 Assembly Instructions preview
TYPE 1
Brand: E-Z-RECT Pages: 2
Borroughs BASIC PRO SERIES Assembly Instructions Manual preview
BASIC PRO SERIES
Brand: Borroughs Pages: 17
U.S. General 58073 Owner'S Manual & Safety Instructions preview
58073
Brand: U.S. General Pages: 8
Infortrend EonStor GS 3000 Series Hardware Manual preview
EonStor GS 3000 Series
Brand: Infortrend Pages: 134
I-O DATA HDC-UXW Setup Manual preview
HDC-UXW
Brand: I-O DATA Pages: 2
Dell PowerVault 110T SDLT320 User Manual preview
PowerVault 110T SDLT320
Brand: Dell Pages: 43
Dell PowerVault 120T User Manual preview
PowerVault 120T
Brand: Dell Pages: 53
Dell Dell PowerVault MD32X0 Implementation Manual preview
Dell PowerVault MD32X0
Brand: Dell Pages: 33
Dell Portable Backup Hard Drive User Manual preview
Portable Backup Hard Drive
Brand: Dell Pages: 13
Dell PowerVault 100 Getting Started Manual preview
PowerVault 100
Brand: Dell Pages: 72
Dell Express Flash NVMe PCIe SSD AIC User Manual preview
Express Flash NVMe PCIe SSD AIC
Brand: Dell Pages: 15
Dell EMC PowerStore Quick Start Manual preview
EMC PowerStore
Brand: Dell Pages: 8
Dell EMC Unity Quick Start Manual preview
EMC Unity
Brand: Dell Pages: 9
Dell EMC CX4-120 Features preview
EMC CX4-120
Brand: Dell Pages: 2

Brands by name

Popular brands

Load more brands