manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

Remote Copy

Remote copy is a function that copies data between different storage systems in remote locations by using the
"REC". REC is an enhancement of the EC mirror suspend method of the local copy function. Mirroring, snapshots,
and backup between multiple storage systems can be performed by using an REC.
An REC can be used to protect data against disaster by duplicating the database and backing up data to a re-
mote location.
The older models of the ETERNUS Hybrid Storage Systems and the ETERNUS Disk Storage Systems are connecta-
ble.

●

REC

REC is used to copy data among multiple devices using the EC copy method. REC is suitable for the following
usages:

•

Performing system test data replication

•

Duplicating databases on multiple ETERNUS DX/AF storage systems

•

Backing up data to remote ETERNUS DX/AF storage systems

Figure 51 REC

Backup site

Backup 
volume

SAN

Management 

server

Operating 

volume

SAN

Management 

server

Main site

WAN

ETERNUS DX/AF

ETERNUS DX/AF

Remote copy

(REC)

The REC data transfer mode has two modes: the synchronous transfer mode and the asynchronous transfer
mode. These modes can be selected according to whether importance is placed upon I/O response time or com-
plete backup of the data is performed until the point when a disaster occurs.

Table 32 REC Data Transfer Mode

Data transfer mode

I/O response

Updated log status in the case of disaster

Synchronous transmission mode

Affected by transmission delay

Data is completely backed up until the point when
a disaster occurs.

Asynchronous transmission mode

Not affected by transmission delay

Data is backed up until a few seconds before a dis-
aster occurs.

■

Synchronous Transmission Mode

Data that is updated in a copy source is immediately copied to the copy destination. Write completion signals to
write requests for the server are only returned after both the write to the copy source and the copy to the copy
destination have been done. Synchronizing the data copy with the data that is written to the copy source guar-
antees the contents of the copy source and copy destination at the time of completion.

2. Basic Functions

Backup (Advanced Copy)
 

93

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Husky H6CH36LEG Use And Care Manual preview
H6CH36LEG
Brand: Husky Pages: 4
Hanover 9820007 Owner'S Manual preview
9820007
Brand: Hanover Pages: 27
Xerxes Fiberglass Underground Storage Tanks Installation Manual preview
Fiberglass Underground Storage Tanks
Brand: Xerxes Pages: 31
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
LaCie 301300U - Ethernet Disk NAS Server User Manual preview
301300U - Ethernet Disk NAS Server
Brand: LaCie Pages: 62
Macpower & Tytech M9-LAN User Manual & Installation Manual preview
M9-LAN
Brand: Macpower & Tytech Pages: 18
G-Technology G-SPEED SHUTTLE with Thunderbolt 3 Quick Start Manual preview
G-SPEED SHUTTLE with Thunderbolt 3
Brand: G-Technology Pages: 8
Segger embOS-MPU Manual preview
embOS-MPU
Brand: Segger Pages: 56
Yardmaster 1013 WGY Assembly Instructions Manual preview
1013 WGY
Brand: Yardmaster Pages: 24
Broadcom BroadNAS User Manual preview
BroadNAS
Brand: Broadcom Pages: 24
Seagate Pavilion 4500 - Desktop PC Datasheet preview
Pavilion 4500 - Desktop PC
Brand: Seagate Pages: 2
Seagate Momentus ST160LT003 - 9YG141 Product Manual preview
Momentus ST160LT003 - 9YG141
Brand: Seagate Pages: 40
Seagate ST3120026A-RK - Barracuda 120 GB Ultra ATA/100 Hard Drive Datasheet preview
ST3120026A-RK - Barracuda 120 GB Ultra ATA/100 Hard Drive
Brand: Seagate Pages: 2
Seagate Medalist 10231 Product Manual preview
Medalist 10231
Brand: Seagate Pages: 40
Seagate MEDALIST 1080SL Installation Manual preview
MEDALIST 1080SL
Brand: Seagate Pages: 40
Seagate ST320LT030 Product Manual preview
ST320LT030
Brand: Seagate Pages: 32
Seagate ST36450A Installation Manual preview
ST36450A
Brand: Seagate Pages: 44
Seagate Expansion User Manual preview
Expansion
Brand: Seagate Pages: 15

Brands by name

Popular brands

Load more brands