manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

Data Migration

Storage Migration

Storage Migration is a function that migrates the volume data from an old storage system to volumes in a new
storage system without using a host in cases such as when replacing a storage system.
The migration source storage system and migration destination ETERNUS DX are connected using FC cables. Da-
ta read from the target volume in the migration source is written to the migration destination volume in the
ETERNUS DX.
Since Storage Migration is controlled by ETERNUS DX controllers, no additional software is required.
The connection interface is FC. In addition, the direct connection and switch connection topologies are suppor-
ted.
Online Storage Migration and offline Storage Migration are supported.

•

Offline method
Stop the server during the data migration. Host access becomes available after the data migration to the mi-
gration destination volume is complete. Therefore, this method prevents host access from affecting the ETER-
NUS DX and can shorten the time of the migration. This method is suitable for cases requiring quick data mi-
gration.

•

Online method
Host access becomes available after the data migration to the migration destination volume starts. Operations
can be performed during the data migration. Therefore, this method can shorten the time for the stopped op-
eration. This method is suitable for cases requiring continued host access during the data migration.

Figure 77 Storage Migration

ETERNUS DX

The source storage system

FC

Storage Migration

The Storage Migration function migrates whole volumes at the block level. A data migration can be started by
specifying a text file with migration information that is described in a dedicated format from ETERNUS Web GUI.
The path between the migration source and the migration destination is called a migration path. The maximum
number of migration volumes for each migration path is 512.
Up to 16 migration source devices can be specified and up to eight migration paths can be created for each mi-
gration source device.
The capacity of a volume that is to be specified as the migration destination area must be larger than the migra-
tion source volume capacity.

3. SAN Functions

Data Migration
 

128

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Cactus 100 Series Product Manual preview
100 Series
Brand: Cactus Pages: 27
G-Technology G-RAID Studio Instructions Manual preview
G-RAID Studio
Brand: G-Technology Pages: 32
G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
IBM Storwize V7000 Introduction And Implementation Manual preview
Storwize V7000
Brand: IBM Pages: 670
trueCall Call Recorder Manual preview
Call Recorder
Brand: trueCall Pages: 16
Macpower & Tytech M9 - NDAS User Manual preview
M9 - NDAS
Brand: Macpower & Tytech Pages: 21
Yardmaster 108 WGL Assembly Instructions Manual preview
108 WGL
Brand: Yardmaster Pages: 23
Apacer Technology AP-SRFD255AXXXXR-G Specifications preview
AP-SRFD255AXXXXR-G
Brand: Apacer Technology Pages: 18
Aaeon FES-5120 Manual preview
FES-5120
Brand: Aaeon Pages: 52
Konig CMP-MOBSTOR120 User Manual preview
CMP-MOBSTOR120
Brand: Konig Pages: 33
Philips SPE3071CC Specifications preview
SPE3071CC
Brand: Philips Pages: 2
Philips SPE3091CC Specifications preview
SPE3091CC
Brand: Philips Pages: 2
Philips SPE3000 series User Manual preview
SPE3000 series
Brand: Philips Pages: 52
DANE-ELEC SO MOBILE OTB HELLO KITTY Datasheet preview
SO MOBILE OTB HELLO KITTY
Brand: DANE-ELEC Pages: 2
MAXDATA SR 1202 Quick Manual preview
SR 1202
Brand: MAXDATA Pages: 6
MCE Technologies OptiBay Installation Manual preview
OptiBay
Brand: MCE Technologies Pages: 19
Hitachi DKC-F810I-1PL16 Hardware Reference Manual preview
DKC-F810I-1PL16
Brand: Hitachi Pages: 36
Foxconn ICH6R User Manual preview
ICH6R
Brand: Foxconn Pages: 45

Brands by name

Popular brands

Load more brands