manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

●

FCoE

Since Fibre Channel over Ethernet (FCoE) encapsulates FC frames and transfers them over Ethernet, a LAN envi-
ronment and an FC-SAN environment can be integrated. When there are networks for multiple I/O interfaces
(e.g. in a data center), the networks can be integrated and managed.

●

Ethernet

Ethernet is a NAS connection interface. An Ethernet network can be accessed as a file server from multiple con-
nected clients with different operating systems, for the easy sharing of data. The ETERNUS DX has an internal file
system for connection to existing LAN, allowing Ethernet to be installed relatively easily. However, load on the
network will increase, and therefore Ethernet is not suitable for applications that require high transfer rates.
A Unified kit is required to install Ethernet host interface. Registering the Unified kit license to the storage sys-
tem enables the NAS function.

■

Number of Installable Host Interfaces

In the ETERNUS DX500 S4/DX500 S3, two host interfaces can be installed in the controller. Each storage system
can be installed with four host interfaces.
In the ETERNUS DX600 S4/DX600 S3, four host interfaces can be installed in the controller. Each storage system
can be installed with eight host interfaces.

 

In the ETERNUS DX600 S4/DX600 S3 via an AC100V connection, two host interfaces can be installed in the
controller. Each storage system can be installed with four host interfaces.

 

Different types of host interfaces can exist together in the same ETERNUS DX.

Unified License

Installing the Unified License requires the Memory Extension and the Ethernet host interface.

 

Unified kit/Unified License cannot be installed if the Deduplication/Compression function is used.

 

5. Hardware Configurations

Optional Product Installation Conditions
 

180

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Seagate ST9150AG Installation Manual preview
ST9150AG
Brand: Seagate Pages: 24
Iomega eGo 34796 Quick Start Manual preview
eGo 34796
Brand: Iomega Pages: 36
US Robotics USR8700 Quick Installation Manual preview
USR8700
Brand: US Robotics Pages: 36
TRINITY Pro TLSF-7209 Owner'S Manual preview
TLSF-7209
Brand: TRINITY Pro Pages: 12
WiebeTech RTX400-SV User Manual preview
RTX400-SV
Brand: WiebeTech Pages: 5
Icy Box IB-RD3262-USE2 User Manual preview
IB-RD3262-USE2
Brand: Icy Box Pages: 36
morse 287-2H Operator'S Manual preview
287-2H
Brand: morse Pages: 8
HP Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz User Manual preview
Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz
Brand: HP Pages: 40
HP HDD Troubleshooting Manual preview
HDD
Brand: HP Pages: 48
HP E8D48AA Specifications preview
E8D48AA
Brand: HP Pages: 11
HP Compaq Presario,Presario 2128 Release Note preview
Compaq Presario,Presario 2128
Brand: HP Pages: 24
HP Compaq Presario,Presario 2100 User Manual preview
Compaq Presario,Presario 2100
Brand: HP Pages: 42
HP D2200sb Maintenance And Service Manual preview
D2200sb
Brand: HP Pages: 53
HP ET353AA Quickspecs preview
ET353AA
Brand: HP Pages: 5
HP DAT-160 Brochure preview
DAT-160
Brand: HP Pages: 2
HP FIPS 140-2 Supplementary Manual preview
FIPS 140-2
Brand: HP Pages: 26
HP ES3-H Series Disassembly Instructions preview
ES3-H Series
Brand: HP Pages: 4
HP Compaq Presario,Presario 2120 User Manual preview
Compaq Presario,Presario 2120
Brand: HP Pages: 38

Brands by name

Popular brands

Load more brands