manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

Item

Specifications

Copy path (connection between storage systems)

Direct connection and remote connection

The maximum configurable capacity (per storage system) (*1)

3,072TB (ETERNUS DX500 S4/DX500 S3)
8,192TB (ETERNUS DX600 S4/DX600 S3)

Maximum number of TFO groups (per ETERNUS DX)

32

Failover

Automatic

¡

Manual

¡

Failback

Automatic

¡

Manual

¡

Automatic failover triggers

ETERNUS DX/AF failure

¡

Power failure/shutdown

¡

RAID failure/RAID blockage

¡

CA port link down

¡

Storage Cluster Continuous Copy (*2)

¡

¡

: Possible, 

´

: Not possible

*1: The total available capacity of TFOVs for a ETERNUS DX can be expanded by setting an expansion for the

total capacity of TFOVs. If the installed memory is not sufficient, the expansion setting cannot be per-
formed.
For details on setting an expansion for the total capacity of TFOVs, refer to "ETERNUS CLI User's Guide".

*2: Storage Cluster Continuous Copy is an ETERNUS DX/AF function that performs a copy on the Primary storage

and the Secondary storage simultaneously, and achieves consistency between the two storage systems.
This is achieved by operating Advanced Copy from a TFOV to a TFOV.

 

•

After an error occurs in the Primary storage or RAID group, while the Primary storage is being switched to
the Secondary storage (max. 10 seconds), the Primary and Secondary storage cannot be accessed. There-
fore, business applications are expected to have a maximum I/O delay response of 10 seconds.

•

Data mirroring between the Primary storage and the Secondary storage is performed by the Storage Cluster
during normal operations. When a Write is performed from the server to the Primary storage, data is also
transferred to the Secondary storage, and after the transfer is complete a Write completion is returned to
the server. Therefore, when the Storage Cluster is installed, the response degrades during a Write compared
to an environment without the Storage Cluster.

•

Using OPC or QuickOPC for Advanced Copy from a TFOV is recommended.

•

In environments that use an iSCSI configuration, a switchover of the storage systems that is required for a
failover or a failback takes from 30 seconds to 120 seconds to be complete. Server I/O must also be restar-
ted in some cases.

•

The connection interface of business servers is FC or iSCSI (cannot be mixed). In addition, the switch con-
nection topology is supported.

•

For details on the required environment for the Storage Cluster (OS, HBA, multipath driver, and cluster soft-
ware), refer to "Support Matrix".

 

3. SAN Functions

Stable Operation via Load Control
 

127

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

LaCie Mobile Disk Quick Install Manual preview
Mobile Disk
Brand: LaCie Pages: 22
Gardebruk 109174 Manual preview
109174
Brand: Gardebruk Pages: 32
Kingston Technology DataTraveler Locker+ Generation 3 DTLPG3 Installation Manual preview
DataTraveler Locker+ Generation 3 DTLPG3
Brand: Kingston Technology Pages: 1623
Dancover ST03850 Manual preview
ST03850
Brand: Dancover Pages: 12
Duratuf Kiwi MK1 Assembly Instructions Manual preview
Kiwi MK1
Brand: Duratuf Pages: 16
Seagate MEDALIST 1270 Installation Manual preview
MEDALIST 1270
Brand: Seagate Pages: 36
IBM Storwize V5000E Quick Installation Manual preview
Storwize V5000E
Brand: IBM Pages: 120
Geekworm NASPi-Gemini User Manual preview
NASPi-Gemini
Brand: Geekworm Pages: 13
Hitachi F1500 Hardware Manual preview
F1500
Brand: Hitachi Pages: 208
Hitachi AMS 2500 Getting Started Manual preview
AMS 2500
Brand: Hitachi Pages: 36
Acer USB2.0 Flash Stick User Manual preview
USB2.0 Flash Stick
Brand: Acer Pages: 11
Acer CFE100 Quick Start Manual preview
CFE100
Brand: Acer Pages: 24
Acer USB 2.0 Flash Stick User Manual preview
USB 2.0 Flash Stick
Brand: Acer Pages: 12
Acer RAID Ready Systems User Manual preview
RAID Ready Systems
Brand: Acer Pages: 21
Acer External Hard Disk Drive 500Gb Quick Installation Manual preview
External Hard Disk Drive 500Gb
Brand: Acer Pages: 2
D-Link MediaLounge DSM-602H Quick Installation Manual preview
MediaLounge DSM-602H
Brand: D-Link Pages: 12
D-Link SharePort DNS-323 User Manual preview
SharePort DNS-323
Brand: D-Link Pages: 17
D-Link Storage User Manual preview
Storage
Brand: D-Link Pages: 46

Brands by name

Popular brands

Load more brands