manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

Drive Enclosures

This section explains the installation conditions for drive enclosures.

 

For details on the rack installation order, refer to "Rack Installation Specifications" in "Site Planning Guide".

 

■

Types of Drive Enclosures

There are three types of drive enclosures that correspond to available drive sizes (2.5", 3.5", and high-density
3.5").
Twenty-four 2.5" drives can be installed in a single 2.5" type drive enclosure.
Twelve 3.5" drives can be installed in a single 3.5" type drive enclosure.
Sixty high-density 3.5" drives can be installed in a high-density drive enclosure.

■

Number of Installable Drive Enclosures

Up to 22 drive enclosures can be installed in the ETERNUS DX500 S4/DX500 S3. Up to 44 drive enclosures can be
installed in the ETERNUS DX600 S4/DX600 S3.
The number of each type of drive enclosure that can be installed is shown below.

Table 56 Number of Installable Drive Enclosures

Type

ETERNUS DX500 S4/DX500 S3

ETERNUS DX600 S4/DX600 S3

2.5" type drive enclosures

22

44

3.5" type drive enclosures

22

44

High-density drive enclosures

8

16

If different types of drive enclosures are installed, up to 22 drive enclosures can be installed in the ETERNUS
DX500 S4/DX500 S3 and up to 44 drive enclosures can be installed in the ETERNUS DX600 S4/DX600 S3.
Drive enclosures can be installed until the total number of drive slots reaches the maximum number that can be
installed (528 for the ETERNUS DX500 S4/DX500 S3 and 1056 for the ETERNUS DX600 S4/DX600 S3). If the num-
ber of drive slots reaches the limit, additional drive enclosures cannot be added.
For example, if twenty 2.5" type drive enclosures are installed in a ETERNUS DX500 S4/DX500 S3, up to two 3.5"
type drive enclosures can be added. However, a high-density drive enclosure cannot be added.

5. Hardware Configurations

Optional Product Installation Conditions
 

181

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

IBM 7133 Series Service Manual preview
7133 Series
Brand: IBM Pages: 230
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Brand: Qlogic Pages: 20
OEM Tools 24739 Operating Instructions And Parts Manual preview
24739
Brand: OEM Tools Pages: 4
Western Digital WD Caviar Green WD10EADS Specification Sheet preview
WD Caviar Green WD10EADS
Brand: Western Digital Pages: 2
ADS-tec StoraXe PowerBooster GSS0608 Manual preview
StoraXe PowerBooster GSS0608
Brand: ADS-tec Pages: 140
LaCie 301382U Quick Install Manual preview
301382U
Brand: LaCie Pages: 28
Seagate ST3120025ACE Installation Manual preview
ST3120025ACE
Brand: Seagate Pages: 2
Arrow Storage Products HDVAS107 Owner'S Manual & Assembly Manual preview
HDVAS107
Brand: Arrow Storage Products Pages: 44
Dot Hill Systems AssuredSAN 4544 Setup Manual preview
AssuredSAN 4544
Brand: Dot Hill Systems Pages: 100
Infortrend EonStor A12E-G2121 Quick Installation Manual preview
EonStor A12E-G2121
Brand: Infortrend Pages: 7
Atlas LiFePO4 User Manual preview
LiFePO4
Brand: Atlas Pages: 38
Teac Digi Drive Movie Product Overview preview
Digi Drive Movie
Brand: Teac Pages: 9
Edsal UR361860 Manual preview
UR361860
Brand: Edsal Pages: 2
EditShare 24Q Setup And User Manual preview
24Q
Brand: EditShare Pages: 112
Heartland 16615-G Assembly Manual preview
16615-G
Brand: Heartland Pages: 71
ABSCO SHEDS J30082SECO Assembly Instructions Manual preview
J30082SECO
Brand: ABSCO SHEDS Pages: 20
ABSCO SHEDS J15231FK Assembly Instruction Manual preview
J15231FK
Brand: ABSCO SHEDS Pages: 20
LapSafe FLEX Manual preview
FLEX
Brand: LapSafe Pages: 7

Brands by name

Popular brands

Load more brands