manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

 

•

To set Eco-mode schedule, use ETERNUS Web GUI, ETERNUS CLI, ETERNUS SF Storage Cruiser, or ETERNUS SF
AdvancedCopy Manager. Note that schedules that are created by ETERNUS Web GUI or ETERNUS CLI and
schedules that are created by ETERNUS SF Storage Cruiser or ETERNUS SF AdvancedCopy Manager cannot be
shared. Make sure to use only one type of software to manage a RAID group.

•

Use ETERNUS Web GUI or ETERNUS CLI to set Eco-mode for TPPs. ETERNUS SF Storage Cruiser or ETERNUS SF
AdvancedCopy Manager cannot be used to set the Eco-mode for TPPs and FTRPs.

•

Specify the same Eco-mode schedule for the RAID groups that configure a WSV. If different Eco-mode sched-
ules are specified, activation of stopped disks when host access is performed occurs and the response time
may increase.

•

The operation time of disks varies depending on the Eco-mode schedule and the disk access.

-

Access to a stopped disk outside of the scheduled operation time period causes the motor of the stopped
disk to be spun up, allowing normal access in about one to five minutes. When a set time elapses since
the last access to a disk, the motor of the disk is stopped.

-

If a disk is activated from the stopped state more than a set amount of times in a day, the Eco-mode
schedule is not applied and disk motors are not stopped by the Eco-mode.
(Example 1) Setting the Eco-mode schedule via ETERNUS Web GUI
Operation schedule is set as 9:00 to 21:00 and there are no accesses outside of the scheduled period

21:00

9:00

1:00

0:00

Stop

Stop

The disk stops 10 min
after the scheduled operation

The motor starts rotating 
10 min before the scheduled operation

Operation

Scheduled operation

(Example 2) Setting the Eco-mode schedule via ETERNUS Web GUI
Operation schedule is set as 9:00 to 21:00 and there are accesses outside of the scheduled period

Stop

Scheduled operation

Stop

Operation

21:00

9:00

1:00

Operation

Operation

Access

Stop accessing

The disk stops 10 min after the scheduled operation

Accessible in 1 to 5 min

The motor starts rotating 
10 min before the scheduled operation

 

2. Basic Functions

Environmental Burden Reduction
 

79

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

ECKELMANN CI 3000 Operating Instruction preview
CI 3000
Brand: ECKELMANN Pages: 134
Olympus Camedia MAUSB-100 Quick Start Manual preview
Camedia MAUSB-100
Brand: Olympus Pages: 2
Gigastone SmartBox Quick Start Manual preview
SmartBox
Brand: Gigastone Pages: 2
IBM System Storage N3150 Installation And Setup Instructions preview
System Storage N3150
Brand: IBM Pages: 24
B&B Electronics USOTL4 Quick Start Manual preview
USOTL4
Brand: B&B Electronics Pages: 2
ICON ITSTC56 Series Owner'S Manual & Safety Instructions preview
ITSTC56 Series
Brand: ICON Pages: 22
AIC J4024-02 User Manual preview
J4024-02
Brand: AIC Pages: 105
ATI Technologies SX160 Manual Installation, Use And Maintenance preview
SX160
Brand: ATI Technologies Pages: 24
LaCie d2 300938 Specifications preview
d2 300938
Brand: LaCie Pages: 2
IBM System Storage DCS Series Installation And Migration Manual preview
System Storage DCS Series
Brand: IBM Pages: 90
Seville Classics UltraHD 20267 Assembly Instructions Manual preview
UltraHD 20267
Brand: Seville Classics Pages: 9
Riverlea SmartStore SM2520 Assembly Instructions Manual preview
SmartStore SM2520
Brand: Riverlea Pages: 16
SonicWALL CDP 5040 Getting Started Manual preview
CDP 5040
Brand: SonicWALL Pages: 56
ORANGE Option GlobeTrotter User Manual preview
Option GlobeTrotter
Brand: ORANGE Pages: 34
Husky H56MWC5GBXD Use And Care Manual preview
H56MWC5GBXD
Brand: Husky Pages: 10
Lenovo Storage N4610 User Manual And Hardware Maintenance Manual preview
Storage N4610
Brand: Lenovo Pages: 176
QNAP TS-73AeU Series User Manual preview
TS-73AeU Series
Brand: QNAP Pages: 70
NetApp DS2246 Installation And Service Manual preview
DS2246
Brand: NetApp Pages: 74

Brands by name

Popular brands

Load more brands