manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

 

•

In the ETERNUS DX, volumes have different stripe sizes that depend on the RAID level and the stripe depth
parameter.
For details about the stripe sizes for each RAID level and the stripe depth parameter values, refer to "ETER-
NUS Web GUI User's Guide".
Note that the available user capacity can be fully utilized if an exact multiple of the stripe size is set for the
volume size. If an exact multiple of the stripe size is not set for the volume size, the capacity is not fully
utilized and some areas remain unused.

•

When a Thin Provisioning Pool (TPP) is created, a control volume is created for each RAID group that config-
ures the relevant TPP. Therefore, the maximum number of volumes that can be created in the ETERNUS DX
decreases by the number of RAID groups that configure a TPP.

•

When the Flexible Tier function is enabled, 64 work volumes are created. The maximum number of volumes
that can be created in the ETERNUS DX decreases by the number of work volumes that are created.

•

When a Flexible Tier Sub Pool (FTSP) is created, a control volume is created for each RAID group that config-
ures the relevant FTSP. Therefore, the maximum number of volumes that can be created in the ETERNUS DX
decreases by the number of RAID groups that configure an FTSP.

•

When using the VVOL function, a single volume for the VVOL management information is created the mo-
ment a VVOL is created. The maximum number of volumes that can be created in the ETERNUS DX decrea-
ses by the number of volumes for the VVOL management information that are created.

 

Hot Spares

Hot spares are used as spare drives for when drives in a RAID group fail, or when drives are in error status.

Figure 10 Hot Spares

Hot spare

Failure

RAID group

 

When the RAID level is RAID6-FR, data in a failed drive can be restored to a reserved space in a RAID group
even when a drive error occurs because a RAID6-FR RAID group retains a reserved space for a whole drive in
the RAID group. If the reserved area is in use and an error occurs in another drive (2nd) in the RAID group,
then the hot spare is used as a spare.

 

■

Types of Hot Spares

The following two types of hot spare are available:

•

Global Hot Spare
This is available for any RAID group. When multiple hot spares are installed, the most appropriate drive is au-
tomatically selected and incorporated into a RAID group.

2. Basic Functions

RAID Functions
 

28

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Facom 2240 Instruction Manual preview
2240
Brand: Facom Pages: 4
Addonics Technologies AEIDMD4U2 Installation Manual preview
AEIDMD4U2
Brand: Addonics Technologies Pages: 2
garofalo BAULE 150 User Manual preview
BAULE 150
Brand: garofalo Pages: 12
Yardmaster 68 ZGEY Assembly Instructions Manual preview
68 ZGEY
Brand: Yardmaster Pages: 20
Segger embOS-MPU Manual preview
embOS-MPU
Brand: Segger Pages: 56
G-Technology G-RAID mini 1TB Installation Manual preview
G-RAID mini 1TB
Brand: G-Technology Pages: 13
HOLZMANN MASCHINEN WB160L Assembly Instruction Manual preview
WB160L
Brand: HOLZMANN MASCHINEN Pages: 18
QNAP TS-1232XU User Manual preview
TS-1232XU
Brand: QNAP Pages: 55
Philips BD-R BR5S2J01F Specification Sheet preview
BD-R BR5S2J01F
Brand: Philips Pages: 2
Philips FM01FD00B Specifications preview
FM01FD00B
Brand: Philips Pages: 2
Philips CD740RW Specifications preview
CD740RW
Brand: Philips Pages: 2
Philips Computer Drive User Manual preview
Computer Drive
Brand: Philips Pages: 2
Philips DVDRW620 Specifications preview
DVDRW620
Brand: Philips Pages: 2
Philips Active Crystals FM01SW80 Specifications preview
Active Crystals FM01SW80
Brand: Philips Pages: 2
Philips FM FD35B Series User Manual preview
FM FD35B Series
Brand: Philips Pages: 163
Seagate ST610712DE Product Manual preview
ST610712DE
Brand: Seagate Pages: 48
Samsung MU-PT1T0B User Manual preview
MU-PT1T0B
Brand: Samsung Pages: 17
Samsung MZ-5PA064 Installation Manual preview
MZ-5PA064
Brand: Samsung Pages: 18

Brands by name

Popular brands

Load more brands