manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

■

Asynchronous Transmission Mode

Data that is updated in a copy source is copied to the copy destination after a completion signal to the write
request is returned.
The Stack mode and the Consistency mode are available in the Asynchronous transmission mode. Selection of
the mode depends on the usage pattern of the remote copy. The Through mode is used to stop data transfer by
the Stack mode or the Consistency mode.

•

Stack mode
Only updated block positions are recorded before returning the completion signal to the server, so waiting-for-
response affects on the server are small. Data transfer of the recorded blocks can be performed by an inde-
pendent transfer process.
The Stack mode can be used for a copy even when the line bandwidth is small. Therefore, this mode is mainly
used for remote backup.

•

Consistency mode
This mode guarantees the sequential transmission of updates to the remote copy destination device in the
same order as the writes occurred. Even if a problem occurs with the data transfer order due to a transmission
delay in the WAN, the update order in the copy destination is controlled to be maintained.
The Consistency mode is used to perform mirroring for data with multiple areas such as databases in order to
maintain the transfer order for copy sessions.
This mode uses part of the cache memory as a buffer (REC Buffer). A copy via the REC Buffer stores multiple
REC session I/Os in the REC Buffer for a certain period of time. Data for these I/Os is copied in blocks.
When a capacity shortage for the REC Buffer occurs, the REC Disk Buffer can also be used. A REC Disk Buffer is
used as a temporary destination to save copy data.

•

Through mode
After an I/O response is returned, this mode copies the data that has not been transferred as an extension of
the process.
The Through mode is not used for normal transfers. When STOPping or SUSPENDing the Stack mode or the
Consistency mode, this mode is used to change the transfer mode to transfer data that has not been transfer-
red or to resume transfers.

2. Basic Functions

Backup (Advanced Copy)
 

94

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Eastwood 31554 Instructions Manual preview
31554
Brand: Eastwood Pages: 8
IBM 1402 Reference Manual preview
1402
Brand: IBM Pages: 80
Hanover 9820010 Owner'S Manual preview
9820010
Brand: Hanover Pages: 21
Overland Storage NEO 4000 Remove & Replace Instructions preview
NEO 4000
Brand: Overland Storage Pages: 6
Medion P83771 Instruction Manual preview
P83771
Brand: Medion Pages: 37
Arrow Storage Products HDVAS107 Owner'S Manual & Assembly Manual preview
HDVAS107
Brand: Arrow Storage Products Pages: 44
Seagate Exos ST2000NM0075 Product Manual preview
Exos ST2000NM0075
Brand: Seagate Pages: 42
WiebeTech Forensic ComboDock FCDv6 Manual preview
Forensic ComboDock FCDv6
Brand: WiebeTech Pages: 20
Hybrid Hybrid Home 4,8 Instruction Manual preview
Hybrid Home 4,8
Brand: Hybrid Pages: 42
Keter DUOTECH HIGH-STORE+ User Manual preview
DUOTECH HIGH-STORE+
Brand: Keter Pages: 31
Geekworm NASPi-Gemini User Manual preview
NASPi-Gemini
Brand: Geekworm Pages: 13
Sony XDAAI1PK Brochure preview
XDAAI1PK
Brand: Sony Pages: 8
Sony BSV-M1 - StorStation NAS Server Operating Instructions Manual preview
BSV-M1 - StorStation NAS Server
Brand: Sony Pages: 58
Symantec FileStore N8300 Product Description Manual preview
FileStore N8300
Brand: Symantec Pages: 55
EVS XFly Technical Reference Hardware Manual preview
XFly
Brand: EVS Pages: 28
Life Fitness SMSS-ADD Owner'S Manual & Assembly Instructions preview
SMSS-ADD
Brand: Life Fitness Pages: 30
Karibu 67417 Building Instructions preview
67417
Brand: Karibu Pages: 48
Supermicro 2028R-E1CR24H User Manual preview
2028R-E1CR24H
Brand: Supermicro Pages: 144

Brands by name

Popular brands

Load more brands