manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

 

•

To suspend a Cascade Copy where session 1 is performed before session 2 and session 2 is an EC or REC
session, perform the Suspend command after the physical copy for copy session 1 is complete.

•

A Cascade Copy can be performed when the copy type for copy session 1 is XCOPY or ODX. The copy destina-
tion area for XCOPY or ODX and the copy source area for copy session 2 do not have to be completely identi-
cal. For example, a Cascade Copy can be performed when the copy source area for copy session 2 is only
part of the copy destination area for copy session 1.
XCOPY or ODX cannot be set as the copy type for copy session 2 in a Cascade Copy.

•

For more details on XCOPY and ODX, refer to 

"Server Linkage Functions" (page 132)

.

•

To acquire valid backup data in the copy destination for copy session 2, a physical copy must be completed
or suspended in all of the copy sessions that configure the Cascade Copy. Check the copy status for copy
sessions 1 and 2 when using the backup data.
However, if a Cascade Copy performs session 1 before session 2, and copy session 1 is an OPC or QuickOPC
session and copy session 2 is an OPC, QuickOPC, SnapOPC, or session, the data in the copy desti-
nation for copy session 2 is available even during a physical copy.

•

If copy session 1 is an EC or REC session and copy session 2 is an OPC, QuickOPC, SnapOPC, or
session, setting copy session 2 after setting copy session 1 to an equivalent or suspended state is recom-
mended.

•

When stopping an OPC or QuickOPC session for copy session 1 during a physical copy, stop copy session 2 in
advance if copy session 2 is an OPC, QuickOPC, SnapOPC, or session.

•

If copy session 2 is an EC or REC session, copy session 2 does not transition to an equivalent state until the
physical copy for copy session 1 is complete. For an EC session, a copy session cannot be suspended until
the session transitions to an equivalent state.

•

If a Cascade Copy performs session 1 before session 2, and copy session 1 is an OPC or QuickOPC session, the
logical data in the intermediate volume when copy session 2 is started (the copy destination volume for
copy session 1) is copied to the copy destination volume for copy session 2. A logical data copy is shown
below.

OPC / QuickOPC

OPC / QuickOPC / 
SnapOPC / 
/ EC / REC

: Copy session 1
: Copy session 2

 

2. Basic Functions

Backup (Advanced Copy)
 

102

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Raidon InTANK iR2775-S3 User Manual preview
InTANK iR2775-S3
Brand: Raidon Pages: 21
Raidon GT8670-TB3 Quick Setup Manual preview
GT8670-TB3
Brand: Raidon Pages: 2
Qsan XCubeDAS XD5324D User Manual preview
XCubeDAS XD5324D
Brand: Qsan Pages: 49
Quantum 7000DLT Series Product Manual preview
7000DLT Series
Brand: Quantum Pages: 312
eazished EZ-16242 Assembly Instructions Manual preview
EZ-16242
Brand: eazished Pages: 12
Orico MSG-U3 User Manual preview
MSG-U3
Brand: Orico Pages: 27
LaCie Rugged USB3 Thunderbolt™ Series User Manual preview
Rugged USB3 Thunderbolt™ Series
Brand: LaCie Pages: 29
Metro DataVac MetroMax i Instructions For Use Manual preview
MetroMax i
Brand: Metro DataVac Pages: 16
Fujitsu Eternus DX80 S2 User Manual preview
Eternus DX80 S2
Brand: Fujitsu Pages: 186
Fujitsu ETERNUS DX60 User Manual preview
ETERNUS DX60
Brand: Fujitsu Pages: 242
Hitachi F1500 Hardware Manual preview
F1500
Brand: Hitachi Pages: 208
Hitachi AMS 2500 Getting Started Manual preview
AMS 2500
Brand: Hitachi Pages: 36
NEC Storage ST1220 User Manual preview
Storage ST1220
Brand: NEC Pages: 69
Rola 8 Series Installation Manual preview
8 Series
Brand: Rola Pages: 2
Monoprice 12186 User Manual preview
12186
Brand: Monoprice Pages: 5
Brabantia WALLFIX STORAGE BOX Instructions For Use preview
WALLFIX STORAGE BOX
Brand: Brabantia Pages: 2
ASUSTOR AS-604RD/RS Quick Installation Manual preview
AS-604RD/RS
Brand: ASUSTOR Pages: 16
WOOD feeling 72114 Building Instructions preview
72114
Brand: WOOD feeling Pages: 27

Brands by name

Popular brands

Load more brands