manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

 

•

The controller firmware version of the ETERNUS DX must be V10L86 or later.

•

The Veeam Storage Integration license must be obtained and registered in the ETERNUS DX.

•

iSCSI and FC host interfaces are supported in Veeam Storage Integration for the connection between backup
proxies and the ETERNUS DX.

•

To connect a Backup Proxy with the ETERNUS DX via an FC, the host affinity settings must be configured for
the Backup Proxy using ETERNUS CLI. For more details, refer to "ETERNUS CLI User's Guide".

•

To enable the ETERNUS DX storage snapshot integration with Veeam Backup & Replication, FUJITSU Plug-In
for Veeam Backup & Replication must be installed to the Veeam backup server.

•

If a volume has several snapshot generations and these snapshots have been created with different resolu-
tions, only the oldest snapshot generation can be deleted.

•

The following volumes cannot be managed or operated by Veeam Backup & Replication:

-

Volumes used for the Storage Cluster function

-

Virtual Volumes (VVOLs)

-

Volumes with Advanced Copy sessions except sessions

-

Volumes with sessions created by ETERNUS SF AdvancedCopy Manager

•

Veeam Backup & Replication jobs or operations may fail during a RAID migration, a Thin Provisioning Vol-
ume balancing, or a Flexible Tier Pool balancing.

•

is used for Veeam Storage Integration.
Thin Provisioning Volumes (TPVs) or Flexible Tier Volumes (FTVs) are used as copy destination
volumes.
Configure an appropriate maximum pool capacity for the Thin Provisioning function by taking the total ca-
pacity of volumes used for Veeam Storage Integration and the number of snapshot generations into consid-
eration. For more details about the maximum pool capacity setting, refer to "Thin Provisioning Pool Man-
agement" in "ETERNUS Web GUI User's Guide".

Guidelines for the maximum pool capacity for the Thin Provisioning function:

Maximum pool capacity 

³

 total capacity of TPVs and FTVs + total capacity of volumes for Veeam Storage

Integration 

´

 (number of snapshot gener 1)

•

It is not recommended to use multiple Veeam Backup & Replication for managing a single ETERNUS DX.
In such configuration, an error might occur at the jobs that are in conflict with each other when being exe-
cuted from multiple Veeam Backup & Replication.

 

3. SAN Functions

Server Linkage Functions
 

139

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

ABSCO SHEDS Regent 30142RK Assembly & Instruction Manual preview
Regent 30142RK
Brand: ABSCO SHEDS Pages: 24
iXsystems TrueNAS R Series Basic Setup Manual preview
TrueNAS R Series
Brand: iXsystems Pages: 24
Transcend StoreJet 35T User Manual preview
StoreJet 35T
Brand: Transcend Pages: 24
Palmako ALASKA 3 B Installation Manual preview
ALASKA 3 B
Brand: Palmako Pages: 62
Outdoor Furniture Plus Woodhaven 1/4 Assembly Instructions preview
Woodhaven 1/4
Brand: Outdoor Furniture Plus Pages: 2
GSi Top Dry 24 Construction And Owners Manual preview
Top Dry 24
Brand: GSi Pages: 84
PNY DUO LINK User Manual preview
DUO LINK
Brand: PNY Pages: 17
Accordance Systems araid 3500 User Manual preview
araid 3500
Brand: Accordance Systems Pages: 58
Medion P89035 User Manual preview
P89035
Brand: Medion Pages: 2
Lifetime 1034594 Assembly Instructions Manual preview
1034594
Brand: Lifetime Pages: 20
JOBO GIGA ONE ULTRA Instruction Manual preview
GIGA ONE ULTRA
Brand: JOBO Pages: 20
Microdia MMCPLUS Operating Manual preview
MMCPLUS
Brand: Microdia Pages: 1
Quantum Travan User Manual preview
Travan
Brand: Quantum Pages: 32
Palram CANOPIA RUBICON How To Assemble preview
CANOPIA RUBICON
Brand: Palram Pages: 71
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
Fujitsu PG-HDH61A User Manual preview
PG-HDH61A
Brand: Fujitsu Pages: 12
Fujitsu PG-HD6G1C User Manual preview
PG-HD6G1C
Brand: Fujitsu Pages: 16
Fujitsu MPG3xxxAT Product Manual preview
MPG3xxxAT
Brand: Fujitsu Pages: 201

Brands by name

Popular brands

Load more brands