manualshive.com logo in svg

Fujitsu ETERNUS DX500 S3/DX600 S3, Design Manual

The Fujitsu ETERNUS DX500 S3/DX600 S3 Design Manual is an essential resource for understanding and maximizing the performance of these storage systems. This comprehensive manual is available for free download from manualshive.com, allowing users to conveniently access the detailed instructions and optimize their experience with the product.

Share
Download
background image

¡

: Possible, 

△

: Partially possible, 

´

: Not possible

*1 : FTV operations can only be executed with ETERNUS SF Storage Cruiser.

FTRP balancing can be executed with either ETERNUS Web GUI or ETERNUS CLI.

*2 : An ODX Buffer volume is an exclusive volume that is required to perform ODX. Standard volumes, TPVs, or

FTVs can be used for the ODX Buffer volume.

*3 : A concatenated volumes cannot be created at the same time as a volume. Existing volumes can be con-

catenated by using LUN Concatenation.

*4 : Eco-mode is configured for Standard volumes/SDVs in RAID group units that include the target volume,

and TPVs in pool (TPP) units.

*5 : If multiple volumes have been concatenated using the LUN Concatenation function, RAID Migration can

be executed only on concatenation source volumes.

*6 : Capacity expansion and RAID Migration cannot be performed at the same time.
*7 : The volume capacity can be expanded by specifying a relatively large capacity for the destination volume

when RAID Migration is performed.

*8 : The maximum number of concatenated volumes is 16.
*9 : If T10-DIF is enabled, this function cannot be executed.
*10: Specify in units of FTRPs. FTVs that need balancing are automatically selected and balanced for each FTSP.
*11: A threshold can be set to the pool which includes the target volume.
*12: Encryption of Standard volumes and SDVs can be performed when the volumes are created, or after the

volumes have been created.
Encryption of SDPVs can be performed only when the volumes are created. SDPVs cannot be encrypted
after they are created.
Encryption of TPVs and FTVs is performed by creating a volume in the encrypted pool, or migrating a vol-
ume to an encrypted pool.

*13: Decryption of volumes is performed by specifying "Unencrypted" for the migration destination when mi-

grating the volumes.

*14: SDVs are used as the copy destination for SnapOPC/. SDVs are also used as the copy source if the

copy destination of SnapOPC/ is also set as the copy source (Cascade Copy/restore).

*15: This is part of the cache parameter settings, and cannot be configured in the units of volumes.

A. Function Specification List

Target Pool for Each Function/Volume List
 

213

FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)

Copyright 2019 FUJITSU LIMITED

P3AM-7722-25ENZ0

Summary of Contents for ETERNUS DX500 S3/DX600 S3



























































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX500 S3/DX600 S3

Seville Classics UltraHD 20296 Assembly Instructions Manual preview
UltraHD 20296
Brand: Seville Classics Pages: 7
Muscle Rack MRWB-3 Assembly Instructions preview
MRWB-3
Brand: Muscle Rack Pages: 2
Gladiator GAGB54SBJG Assembly Instructions Manual preview
GAGB54SBJG
Brand: Gladiator Pages: 16
Backyard YardLine ASTON Assembly Manual preview
YardLine ASTON
Brand: Backyard Pages: 60
LevelOne MUS-1001 User Manual preview
MUS-1001
Brand: LevelOne Pages: 85
Seagate Expansion STEB6000403 Quick Start Manual preview
Expansion STEB6000403
Brand: Seagate Pages: 5
Bosch PTA 2000 Original Instructions Manual preview
PTA 2000
Brand: Bosch Pages: 76
Bosch GTA 2500 Compact Professional Original Instructions Manual preview
GTA 2500 Compact Professional
Brand: Bosch Pages: 84
LaCie Rugged USB 3.0 Thunderbolt™ Series User Manual preview
Rugged USB 3.0 Thunderbolt™ Series
Brand: LaCie Pages: 11
LaCie Porsche Design P 9230 Quick Install Manual preview
Porsche Design P 9230
Brand: LaCie Pages: 1
LaCie Christofle Galet Datasheet preview
Christofle Galet
Brand: LaCie Pages: 2
LaCie 301440 Brochure & Specs preview
301440
Brand: LaCie Pages: 4
LaCie Computer Drive Quick Install Manual preview
Computer Drive
Brand: LaCie Pages: 26
LaCie 301286 User Manual preview
301286
Brand: LaCie Pages: 29
ClearSpan 108294F Manual preview
108294F
Brand: ClearSpan Pages: 25
OLT SM812-FJ-Ply Assembly Manual preview
SM812-FJ-Ply
Brand: OLT Pages: 43
ASUSTOR AS3102T Quick Installation Manual preview
AS3102T
Brand: ASUSTOR Pages: 28
FSP Technology EMERGY 1000 User Manual preview
EMERGY 1000
Brand: FSP Technology Pages: 18

Brands by name

Popular brands

Load more brands