Fujitsu ETERNUS CS800 User Manual Download Page 584

Page: 584 / 604

5. LIMITATION OF LIABILITY. IN NO EVENT SHALL ORACLE BE LIABLE FOR ANY

INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR

DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR

ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF ORACLE

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ORACLE'S ENTIRE

LIABILITY FOR DAMAGES HEREUNDER SHALL IN NO EVENT EXCEED ONE THOUSAND

DOLLARS (U.S. $1,000).

6. TERMINATION. This Agreement is effective until terminated. You may

terminate this Agreement at any time by destroying all copies of Software.

This Agreement will terminate immediately without notice from Oracle if you

fail to comply with any provision of this Agreement. Either party may

terminate this Agreement immediately should any Software become, or in

either party's opinion be likely to become, the subject of a claim of

infringement of any intellectual property right. Upon termination, you must

destroy all copies of Software.

7. EXPORT REGULATIONS. You agree that U.S. export control laws and other

applicable export and import laws govern your use of the Software,

including technical data; additional information can be found on Oracle's

Global Trade Compliance web site (

http://www.oracle.com/products/export

You agree that neither the Software nor any direct product thereof will be

exported, directly, or indirectly, in violation of these laws, or will be

used for any purpose prohibited by these laws including, without

limitation, nuclear, chemical, or biological weapons proliferation.

8. TRADEMARKS AND LOGOS. You acknowledge and agree as between you and

Oracle that Oracle owns the ORACLE and JAVA trademarks and all ORACLE- and

JAVA-related trademarks, service marks, logos and other brand designations

("Oracle Marks"), and you agree to comply with the Third Party Usage

Guidelines for Oracle Trademarks currently located at

http://www.oracle.com/us/legal/third-party-trademarks/index.html

. Any use

you make of the Oracle Marks inures to Oracle's benefit.

9. U.S. GOVERNMENT LICENSE RIGHTS. If Software is being acquired by or on

behalf of the U.S. Government or by a U.S. Government prime contractor or

subcontractor (at any tier), then the Government's rights in Software and

accompanying documentation shall be only those set forth in this Agreement.

584

ETERNUS CS800

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands