Fujitsu ETERNUS CS800 User Manual Download Page 444

Page: 444 / 604

14.2 Diagnostics

To access the

General

page, on the

Healthchecks

page, click the

General

tab (see

"General Page" on page 444

Figure 284: General Page

The

General

page displays the following information about the most recently run

healthchecks:

Status

The status of the healthchecks (

In Progress

Success

Failed

, or

Interrupted

Progress

The percentage complete of the healthchecks.

Start
Time

The time the healthchecks started.

End Time

The time the healthchecks ended.

Use the

General

page to perform the following tasks:

To start all enabled healthchecks, click

Start

To stop all healthchecks in progress, click

Stop

Status

The

Status

page allows you to view information about the most recent test results for each

healthcheck. You can also enable or disable a healthcheck.

The following healthchecks are available:

De-Duplication

- Checks the overall health of the blockpool. This healthcheck verifies

that the metadata in the namespace file and the data tags in the blockpool are correctly in
sync.

444

ETERNUS CS800

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands