10.7 Scheduler
5. (Required for healthchecks and space reclamation) Specify when and how often the
event reoccurs (see
"Setting Recurrence for a Scheduled Event" on page 293
).
6. Click
Apply
.
7. Refresh the browser window to make sure the event settings are applied.
CAUTION!
When adding multiple events of the same type, make sure the events do not overlap. If
two events of the same type overlap, the later event takes precedence over the earlier
event.
After a system reboot, all open-ended events (for example, replication) will restart
at their next scheduled time. Events with end times (for example, replication
throttle) that are past their start time will have their end action occur.
Scheduling a Share or Partition for Replication
Configure a replication schedule for a NAS share or VTL partition to automatically replicate
the share or partition data to the target system at regular intervals. Disable scheduled
replication if you do not want to automatically replicate the share or partition data to the
target.
To schedule a share or partition for replication, you must first add one or more
replication targets (see
"Replication Configuration" on page 270
). In addition, you
must add one or more shares or partitions with deduplication enabled and at least
one target selected (see or
).
To configure a replication schedule for a share or partition:
1. On the
Scheduler
page, add or edit an event in the
NAS Replication
or
VTL
Replication
row (see
"Adding or Editing a Scheduled Event" on page 288
).
2. In the
Share
or
Partition
drop-down box, select the share or partition to schedule for
replication.
Only shares or partitions that are enabled for deduplication appear in the drop-down box.
Scheduling a share or partition that has replication disabled will automatically
enable replication.
3. In the
Target
drop-down box, select the replication target you want to replicate the share
or partition to.
4. Click
OK
.
5. (Optional) Specify when and how often the event reoccurs (see
6. Click
Apply
.
290
ETERNUS CS800
Summary of Contents for ETERNUS CS800
