Fujitsu ETERNUS CS800 User Manual Download Page 218

Page: 218 / 604

10.3 VTL Configuration

Available Partitions

The number of partitions that have been added to the system
and the maximum number of partitions that can be added.

Available Virtual Tape
Drives

The number of virtual tape drives that have been added to the
system and the maximum number of drives that can be
added.

Name

The name of the partition.

Mode

The current mode of the partition (

Online

Offline

Model

The library model emulated by the partition.

Drive Model

The tape drive model emulated by the virtual drives in the
partition.

Drives

The number of virtual tape drives in the partition.

Host Mapping

The current state of host mapping for the partition (

Yes

). If no hosts have been mapped, click

Map

to map hosts

to partitions (see

"Remote Host Mapping" on page 233

Media

The number of virtual tape cartridges in the partition. If no
cartridges have been created, click

Create

to add media (see

"Media Add" on page 224

Slots

The number of storage slots in the partition.

Deduplication

The data deduplication state of the partition (

Enabled

Disabled

Replication

The current state of replication for the partition:

Enabled

- Replication is enabled.

Send/Receive Sync ID

- Cartridge Based Replication is

enabled.

Configure

- Click to configure replication for the partition

(see

"Partitions" on page 216

)

Scheduled

- Replication is scheduled for the partition.

Click to view or modify the schedule (see

"Scheduling a

Share or Partition for Replication" on page 290

Targets

The targets the partition is configured to replicate to.

Click a column heading to sort the rows in the table by that column. Click the
column heading again to reverse the sort order.

Click the Information button

[i]

next to a partition to display detailed information

about the partition and recent replication activity.

218

ETERNUS CS800

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands