Fujitsu ETERNUS CS800 User Manual Download Page 575

Page: 575 / 604

form, of the software or documentation (including modifications) must

contain at least one of the copyright notices.

3. The enclosed software and documentation has not been subjected to

testing and quality control and is not a Hewlett-Packard Co. product. At a

future time, Hewlett-Packard Co. may or may not offer a version of the

software and documentation as a product.

4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD

COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR

DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD

PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE

OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND

IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY

DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

5.HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT,

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST

PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF

THE SOFTWARE OR DOCUMENTATION.

OpenLdap

openldap-2.4.40-5.el6.i686

### ./usr/share/doc/openldap-2.4.40/LICENSE

The OpenLDAP Public License

Version 2.8, 17 August 2003

Redistribution and use of this software and associated documentation

("Software"), with or without modification, are permitted provided that the

following conditions are met:

1. Redistributions in source form must retain copyright statements and

notices,

2. Redistributions in binary form must reproduce applicable copyright

statements and notices, this list of conditions, and the following

disclaimer in the documentation and/or other materials provided with the

distribution, and

3. Redistributions must contain a verbatim copy of this document.The

OpenLDAP Foundation may revise this license from time to time.Each revision

is distinguished by a version number.

ETERNUS CS800

575

20 ETERNUS CS800 3.2 Open-Source Software

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands