Fujitsu ETERNUS CS800, User Manual

Page: 269 / 604

Figure 175: Accent Page
To configure ETERNUS CS800 Accent:
1. To enable ETERNUS CS800 Accent, select the Enable Deduplication with Accent
check box.
Or to disable ETERNUS CS800 Accent, clear the Enable Deduplication with Accent
check box.
You cannot use ETERNUS CS800 Accent if you are currently using
NetBackup Accelerator or Optimized Synthetic Backups. If you are using
Accelerator, please make sure that Accent is not enabled. For more
information on using NetBackup Accelerator, see the
ETERNUS CS800
Configuration and Best Practices Guide for NetBackup from Symantec .
2. Click Apply .
Click the Change Encryption Type link to change the OST data encryption
type (see "Data Encryption" on page 353 ).
To use ETERNUS CS800 Accent, you must install the Fujitsu Technology
Solutions OST Client Plug-in on the media server. For information about
installing the OST Plug-in and using ETERNUS CS800 Accent, see the
ETERNUS CS800 NetBackup and Backup Exec OST Configuration Guide .
10.4.8 OST Client Plug-In
Use the OST Client Plug-In page to download the Fujitsu Technology Solutions OST Plug-
in.
OST (OpenStorage) technology allows Symantec NetBackup and Backup Exec to
seamlessly integrate with the ETERNUS CS800. Using OST, NetBackup and Backup Exec
can manage backups through the ETERNUS CS800 and can take advantage of the
ETERNUS CS800 269
10 Configuration