11.2 Replication Send
"Configuring a Target Partition for Cartridge Based
2. On the source ETERNUS CS800, select the source share or partition and click
Configure
.
Figure 237: Share or partition Configure Window
3. If it is not already selected, select the
Enable Replication
check box to enable
replication for the share or partition.
4. Select the
Enable Directory/File or Cartridge Based Replication to target to target
check box to enable Directory/File or Cartridge Based Replication for the share or
partition.
Or clear the
Enable Directory/File or Cartridge Based Replication to target to target
check box to disable Directory/File or Cartridge Based Replication for the share or
partition.
5. Enter a
Sync ID
in the box.
The
Sync ID
is used to identify the target share or partition that will receive replicated
data from the source share or partition. The
Sync ID
must
be identical to the
Sync ID
of
the target share or partition on the target system.
The
Sync ID
must contain no more than 32 characters (NAS share) or 12 characters
(VTL partition) and can contain only alphanumeric characters, underscores, and
hyphens. (An underscore or hyphen must not be the first character.)
If you are performing Directory/File or Cartridge Based Replication with a
system running an ETERNUS CS800 software version prior to 2.3, you may
need to change the
Sync ID
on the system running pre-2.3 software to match
the above
Sync ID
name restrictions.
376
ETERNUS CS800
Summary of Contents for ETERNUS CS800
