Fujikura FSM-20PMII, Instruction Manual

Page: 49 / 93

-48-
5.3 Manual Motor Operation
5.3 Manual Motor Operation 5.3 Manual Motor Operation
5.3 Manual Motor Operation
The splicer has 9 independent motors, these can be manually operated when the
splicer is in PAUSE state. (ex. READY, CHECK FIBER S/R, PAUSE)
Fibers can be aligned with this manual motor operation at PAUSE1 or PAUSE2. The
motor indicator on the control box displays the selected motor. Select the motor with
the motor select keys on the control box.
The motor can be operated with the motor direction keys on the control box. The
motor moves while the key is pressed, and stops by releasing the key. Moving
direction of each motor is shown in the following table.
Motor Direction Key Motor
Indicator
Motor
Left Right
X X The right fiber moves upward
on X field.
The right fiber moves
downward on X field.
Y Y The left fiber moves upward
on Y field.
The left fiber moves
downward on Y field.
ZL ZL The left fiber moves
backward. The left fiber moves forward.
ZR ZR The right fiber moves
backward.
The right fiber moves
forward.
PL θ
Axis left
The left fiber rotates
backward. (PLR) The left fiber rotates forward.
(PLF)
PR θ
Axis right The right fiber rotates
backward. (PRR)
The right fiber rotates
forward. (PRF)
FOC FOCUS The objective lens moves
away form the fiber. (FAR) The objective lens approaches
the fiber. (NEAR)
FLE FIELD The fiber moves upward. (UP) The fiber moves downward.
(DOWN)
MIR UP/DOWN
MIRROR
Mirror moves to another side.
(UP or DOWN)
Mirror moves to another side.
(UP or DOWN)
[NOTE]
θ
axis motor cannot move when the wind protector is open.