Fujikura FSM-20PMII, Instruction Manual

Page: 10 / 93

-9-
14
17
19
13
12
15
11
18
16
T3.15A
SER. PORT
12V 1.2A
VIDEO OUT
100‑240V 50‑60Hz 3A
GP‑IB
OUT PUT
12V 0.5A
Figure Side View of the Main body Figure Side View of the Main body Figure Side View of the Main body Figure Side View of the Main body
No. Name Function
11 Video Output
Terminal
Outputs the NTSC video signal (manufacturer use.)
12 SER. PORT
Terminal
Used to connect the data transmission cable of the
control box.
13 Input Voltage
Indicator
Indicates the AC input voltage (Green: adequate, Red:
Too high or too low) Input voltage range is AC 100-
240V 50-60Hz (Max.3A.)
14 Power Switch Used to turn on and off the power.
15 DC OUT Power
Terminal
DC 12V , 1.2A output.
16 DC OUT Power
Terminal for
Controller
Used to connect the power cord of the control box.
Output capacity is DC 12V 0.5A.
17 AC Input Fuse
Holder
The 3.15A time lug fuse (20mm length) is used.
18 GP-IB Terminal Used for connecting the GP-IB.
19 AC IN Power
Terminal
To connect the AC power cord when using an AC power
source. Input voltage range is AC 100-240V 50-60Hz
(Max.3A.)